Ok, after some excitement where I accidently declared 4.2.1 to be the
latest oscar release, the 4.2.1 "beta" release is available here:
http://downloads.sourceforge.net/oscar/oscar-4.2.1r5021-20060620.tar.gz?use_mirror=superb-east
I would strongly suggest using 4.2.1 over 4.2. It has lots of bug fixes,
and better support for hardware in general. There are some updated docs
included in the tarbal, but they are also available on the wiki at:
http://svn.oscar.openclustergroup.org/wiki/oscar:4.2.1:install_guide:chapter_1
On 2/26/07, Edi Euloge Cesaire <[EMAIL PROTECTED]> wrote:
Hi,
I made the correction (below) define at page 13 of the installation
manual,
#################
Replace $IMAGEDIR/usr/sbin/efibootmgr with the file from the new elilo
rpm: cp usr/sbin/efibootmgr $IMAGEDIR/usr/sbin
#################
and the :
###############
mkdir /var/lib/systemimager/images/oscarimage/var/lock/rpm
############
but the pb still exists.
I then attach the install.log.
I found nothing specific to oscar in /var/log/messages.
kind regards, Edi
>
> Message: 1
> Date: Mon, 26 Feb 2007 10:31:46 +0000
> From: EDI Euloge <[EMAIL PROTECTED]>
> Subject: Re: [Oscar-users] Oscar-users Digest, Vol 9, Issue 27
> To: oscar-users@lists.sourceforge.net
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi,
> I have more than 13Go available on my disk.
> does the disk type SATA or IDE has an importance for oscar
> installation ?
> Regards,
> Edi
>
> >------------------------------
> >
> >Message: 2
> >Date: Fri, 23 Feb 2007 10:51:26 -0600
> >From: "Michael Edwards" <[EMAIL PROTECTED]>
> >Subject: Re: [Oscar-users] server installation
> >To: oscar-users@lists.sourceforge.net
> >Message-ID:
> > <[EMAIL PROTECTED]>
> >Content-Type: text/plain; charset="iso-8859-1"
> >
> >Did you check "df -lh" to see if you have enough space on your /var
> >partition for the image?
> >They are fairly large.
> >
> >On 2/23/07, EDI Euloge <[EMAIL PROTECTED]> wrote:
> >
> >
> >>
> >>
> >>
> >>>Hello All,
> >>>I try to install oscar-4.2 with scientific linux 3.
> >>>I failed to create client image on the server node .The message
> I got is
> >>>below :
> >>>#########################
> >>>Starting Flamethrower daemon: flamethrowerd.
> >>>Image oscarimage does not exist
> >>>Couldn't run command mksidisk -A --name oscarimage --file
> >>>/opt/oscar/oscarsamples/ide.disk at
> >>>/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/Tk.pm
> line 247
> >>>Use of uninitialized value in hash element at
> >>>/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-
> multi/Tk/Trace.pm line
> >>>
> >>>
> >>181.
> >>
> >>
> >>>Use of uninitialized value in hash element at
> >>>/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-
> multi/Tk/Trace.pm line
> >>>
> >>>
> >>181.
> >>
> >>
> >>>#######################
> >>>My server node is a dell optiplex GX280, with SATA disk under
> kernel>>>2.4.21-32.0.1.ELsmp
> >>>
> >>>I readed on the last mailing list about creating the directory
> >>>/var/lib/systemimager/images/oscarimage/var/lock/rpm. I then did
> this.>>>But each time I launche build client image with my
> partition file :
> >>>###################
> >>>/dev/hda5 75000 ext3 /home defaults
> >>>/dev/hda6 1500 swap swap
> >>>/dev/hda7 5900 ext3 / defaults
> >>>nfs_oscar:/home - nfs /home rw
> >>>##################
> >>>I got the error mentioned above and this directory is erased.
> >>>
> >>>any idea will be really welcomed.
> >>>Regards,
> >>>
> >>>Edi
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users
