Yes I already booted the node from its new Suse image on the hard drive, and I see a linux login prompt which ask me for a username and a password, and then I ran the "Complete cluster setup" step. I checked the /etc/host file and this is what I got:
## hosts This file describes a number of hostname-to-address # mappings for the TCP/IP subsystem. It is mostly # used at boot time, when no name servers are running. # On small systems, this file can be used instead of a # "named" name server. # Syntax: # # IP-Address Full-Qualified-Hostname Short-Hostname 127.0.0.1 localhost 192.168.0.5 sofia.MSHOME sofia # special IPv6 addresses ::1 localhost ipv6-localhost ipv6-loopback fe00::0 ipv6-localnet ff00::0 ipv6-mcastprefix ff02::1 ipv6-allnodes ff02::2 ipv6-allrouters ff02::3 ipv6-allhosts # These entries are managed by SIS, please don't modify them. 192.168.0.7 oscarnode4.MSHOME oscarnode4 > Date: Tue, 6 Mar 2007 12:37:28 -0600 > From: "Michael Edwards" <[EMAIL PROTECTED]> > Subject: Re: [Oscar-users] Oscar install step 7 fail > To: oscar-users@lists.sourceforge.net > Message-ID: > <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > There are some odd things from your message. You said the client nodes had > WinXP on them. I assume that is what they had on them before you installed > OSCAR? OSCAR overwrites the disk on the compute nodes, so it shouldn't have > Xp on it anymore. Before you run "Complete cluster setup" you need to have > booted the node from its new Suse image on the hard drive, so if you put a > monitor on it, you should see a linux login prompt. > > It also appears that the nfs_server aliases are not set up correctly on your > node images. Please check the /etc/hosts file on the head node and see if > it refers to the head node host name in the same line as localhost as > described here: > http://svn.oscar.openclustergroup.org/wiki/oscar:5.0:install_guide:ch2.3_networking_notes > > This would mean that the head node would be able to talk to the compute > nodes, but that when the compute nodes try and talk back they end up talking > to themselves instead. This is not a good thing. > > On 3/6/07, Sofia <[EMAIL PROTECTED]> wrote: > > > > Hello. I am trying to use OSCAR 5.0 with Suse 10.0 in order to cluster > > two computers. The server node has Suse 10.0 installed whereas > > the client has windows XP. I managed to run the cluster installation > > program until to step 6, without any apparent problem. However, it was > > not possible to complete step 7 "Complete Cluster Setup". Here is my > > log archive: > > > > = > > == Running step 7 of the OSCAR wizard: Complete cluster setup > > --> Update Wizard Env (as needed) > > --> Step 7: Running: ./post_install > > Gathering processor count from oscarnode4.MSHOME. > > Updating database for machine oscarnode4.MSHOME cpus=1. > > --> About to run /opt/oscar/packages/oda/scripts/post_install for oda > > generating the /etc/odaserver file on all oscar clients > > /etc/profile.d/c3.sh && cexec 'echo oscar_server > /etc/odaserver' > > ************************* oscar_cluster ************************* > > --------- oscarnode4--------- > > --> About to run /opt/oscar/packages/opium/scripts/post_install for opium > > --> About to run /opt/oscar/packages/switcher/scripts/post_install for > > switcher > > Setting default for tag mpi ("lam-7.1.2") > > Attribute successfully set; new attribute setting will be effective for > > future shells > > --> About to run /opt/oscar/packages/loghost/scripts/post_install for > > loghost > > ************************* oscar_cluster ************************* > > --------- oscarnode4--------- > > oscar_loghost already set > > --> About to run /opt/oscar/packages/ganglia/scripts/post_install for > > ganglia > > [ganglia] Ganglia gmond configuration file modified, re-starting daemon... > > > > Shutting down gmond..done > > Starting gmond..done > > editing /etc/gmetad.conf > > match: gridname\s+.* > > match: data_source\s+.* > > [ganglia] Ganglia gmetad configuration file modified, re-starting > > daemon... > > Shutting down gmetad..done > > Starting gmetad..done > > [ganglia] Starting up apache... > > Syntax OK > > Shutting down httpd2 (waiting for all children to terminate) ..done > > Starting httpd2 (prefork) ..done > > [ganglia] Ganglia page is located at http://sofia/ganglia/ > > ************************* oscar_cluster ************************* > > --------- oscarnode4--------- > > Shutting down gmond..done > > Starting gmond..done > > --> About to run /opt/oscar/packages/torque/scripts/post_install for > > torque > > TORQUE mom config file updated with clienthost: sofia > > Pushing config file to clients... > > Sending SIGHUP to all moms... > > ************************* oscar_cluster ************************* > > --------- oscarnode4--------- > > Restarting TORQUE server > > Stopping TORQUE ServerUnknown Host. > > qterm: could not connect to server (15008)..done > > Starting TORQUE Server..done > > [torque] Updating pbs_server nodes > > Unknown Host. > > /opt/pbs/bin/pbsnodes: cannot connect to server pbs_oscar, error=15008 > > Unknown Host. > > qmgr: cannot connect to server > > Restarting TORQUE server > > Stopping TORQUE ServerUnknown Host. > > qterm: could not connect to server (15008)..done > > Starting TORQUE Server..done > > [torque] Creating TORQUE workq queue... > > Unknown Host. > > qmgr: cannot connect to server > > Unknown Host. > > qmgr: cannot connect to server > > Configuration of TORQUE queues failed, check the logs at /var/spool/pbs at > > /opt/oscar/packages/torque/scripts/post_install line 316 > > Script /opt/oscar/packages/torque/scripts/post_install exitted badly with > > exit code '3' at > > ./post_install line 49 > > Couldn't run 'post_install' script for torque at ./post_install line 50 > > --> About to run /opt/oscar/packages/mta-config/scripts/post_install for > > mta-config > > POSTFIX is running > > Postfix is succesfully configured. : SERVER NODE > > Shutting down mail service (Postfix)..done > > Starting mail service (Postfix)..failed > > - finished configuring postfix > > --> About to run /opt/oscar/packages/ntpconfig/scripts/post_install for > > ntpconfig > > Shutting down network time protocol daemon (NTPD)..done > > Starting network time protocol daemon (NTPD)..done > > ************************* oscar_cluster ************************* > > --------- oscarnode4--------- > > Shutting down network time protocol daemon (NTPD)..done > > Starting network time protocol daemon (NTPD)..done > > Some of the post install scripts failed, please check your logs for more > > info at ./post_install line 55 > > --> Step 7: Failed to properly complete the cluster install; please check > > the logs > > --> Update Wizard Env (as needed) > > > > > > > > Could somebody tell me what the problem might be? > > > > > > ------------------------------------------------------------------------- > > Take Surveys. Earn Cash. Influence the Future of IT > > Join SourceForge.net's Techsay panel and you'll get the chance to share > > your > > opinions on IT & business topics through brief surveys-and earn cash > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > _______________________________________________ > > Oscar-users mailing list > > Oscar-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/oscar-users > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > > ------------------------------ > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > ------------------------------ > > _______________________________________________ > Oscar-users mailing list > Oscar-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/oscar-users > > > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Oscar-users mailing list Oscar-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/oscar-users
