Hi all, Thanks very much for reply. I will first try the option without parallel packages building as you suggested and then the second option and let you about the results.
Regards, Jean-Jacques On Thu, Dec 29, 2011 at 3:26 PM, Juergen Beisert <[email protected]> wrote: > Hi Wingston & Jean-Jacques, > > Wingston Sharon wrote: > > The e2fsprog fails on some machines and not others. but it always > > compiles after enough retries, i noticed that it shows a different > > compile errors every time you do $ptxdist go. > > It always shows a chmod permission make error in a different file every > > time. Keep doing the ptxdist go. If you're luck in like 4-5 tries it > should > > compile again. Thats what happened in 2 machines I've tried in! > > Did you try to build this package on a multicore CPU? > > The behaviour you report sounds like e2fsprog's buildsystem is broken to > build > the whole package in parallel (just an idea). > > @Jean-Jacques: > > Can you try the following: > > - copy the 'e2fsprogs.make' rule file from your PTXdist installation > (usually "/usr/local/lib/ptxdist-2011.12.0/rules") into your local rules/ > directory ('local' = the Mini2440 BSP) > - open this local "rules/e2fsprogs.make" file now and add the following > line > E2FSPROGS_MAKE_PAR := NO > after line 42 into the file. This prevents PTXdist from compiling this > package in parallel. > - and then try to continue to build the BSP > > As an alternative to the mentioned above you can instruct PTXdist to not > compile anything in parallel (but it will slow down the whole build). > > $ ptxdist -ji1 go > > Regards, > Juergen > > -- > Pengutronix e.K. | Juergen Beisert > | > Linux Solutions for Science and Industry | http://www.pengutronix.de/ | >
