Hi Jean-Jacques, Jean-Jacques Tchouto wrote: > Thank again for reply and for the advice. > Ok, I allready solve the problem by manually download > iproute2-2.6.39.tar.gz and > copied in the src directory. > > I was able to compile all the stuff and create the images. > I also successfully create the SD-Card according the document. > > I have two board the tiny6410 and the mini6410 in my knowledge both are > identical. After inserting the SD-Card in the Tiny6410 and switch the to > SD-BOOT and switch the Power-ON, nothing happens.
I'm not sure if the Tiny6410 with its baseboard behaves in the same way as the Mini6410. Or to be more precise: I only tested the Mini6410 BSP on the Mini6410. > Am I doing something wrong? or is the OSELAS-BSP-Pengutronix-Mini6410 > packages not compatible to the tiny6410 board? The S3C6410 processor on the Tiny6410 should work in the same way as the one on the Mini6410. So it expects the data in the same sectors on the SD card. Two questions: - what kind of SD card doe you use? SD or SDHC type (up to 2 GiB or more than 2 GiB capacity)? - did you try this prepared SD card with the Mini6410 too? Did it work on this platform? Regards, Juergen -- Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
