Great Tomasz. Can you please post these?
-----Original Message----- >From: Tomasz Figa <[email protected]> >Sent: Oct 30, 2013 4:54 AM >To: [email protected] >Cc: Jürgen Beisert <[email protected]>, Ryan Fernandez ><[email protected]> >Subject: Re: [oselas] Mini6410 boot from SDHC card help > >Hi Jürgen, Ryan, > >On Tuesday 29 of October 2013 09:16:05 Jürgen Beisert wrote: >> Hi Ryan, >> >> On Monday 28 October 2013 21:40:35 Ryan Fernandez wrote: >> > Hello everyone. This is my first question for the group. >> > >> > I would like to boot PTXdist on my Mini6410 but I need more space than >> > I have with a SD card so I need to boot an SDHC card. Is there any >> > possible way to do this? I have very little experience with this >> > board so any help would be appreciated. >> >> Currently there is no reliable way (from our Mini6410 BSP point of view) >> to let the Mini6410 boot from an SDHC card with a higher capacity than >> 2 GiB. This is due to a firmware bug in the SoC's ROM. Due to this bug >> a different sector layout on the SDHC card is required to make it boot >> directly from this card. > >I have a series of patches adding reasonable support for S3C64xx to >mainline u-boot, which should be able to boot a Mini6410 from an SDHC card >(tested on a Tiny6410 with 256 MB of RAM, which should be compatible). > >You can use my git tree at > >https://github.com/tom3q/u-boot.git >branch s3c64xx > >or look at the patches here > >https://github.com/tom3q/u-boot/commits/s3c64xx > >You will also need a patch to fix sector calculation in mini6410 sd >flasher. I will post them later today. > >Best regards, >Tomasz >
