Sorry yes, I'm using OSG 2.6, strangely enough it may well be linked to the 
dual monitor set up as you suggest.
 
I've just tested this at home on an identical machine but without the extra 
monitor using driver 178.13 and i don't get the error. 
 
I'll try what you suggest on monday, and post the results.
 
Cheers.
 
Kim.

________________________________

From: [EMAIL PROTECTED] on behalf of Wojciech Lewandowski
Sent: Fri 28/11/2008 14:59
To: OpenSceneGraph Users
Subject: Re: [osg-users] FBO OpenGL Error with new nVidia Driver


Hi Kim,
 
Im curious which OSG version you use ? Could this be that you have dual view 
setup ? Maybe you have the same error Marco Jez reported recently. You may try 
to change OSG_MULTIMONITOR_MULTITHREAD_WIN32_NVIDIA_WORKAROUND and see if it 
helps.
 
Cheers,
Wojtek
 

        ----- Original Message ----- 
        From: Kim C Bale <mailto:[EMAIL PROTECTED]>  
        To: OpenSceneGraph Users <mailto:osg-users@lists.openscenegraph.org>  
        Sent: Friday, November 28, 2008 3:42 PM
        Subject: Re: [osg-users] FBO OpenGL Error with new nVidia Driver


        After much installing and uninstalling I've found it's also present in 
the Vista 32-Bit GeForce releases 178.13, 178.24, 180.48.

         

        175.19 work fine.

         

        Should I be concerned about these errors?

         

        K.

         

        From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kim C 
Bale
        Sent: 28 November 2008 13:33
        To: OpenSceneGraph Users
        Subject: [osg-users] FBO OpenGL Error with new nVidia Driver

         

        I've just noticed that I've been getting some errors  when I run 
osgprerender and also in my own program that uses a lot of pre-render cameras 
and FBOs..

         

        Firstly I get:

         

        Warning: detected OpenGL error 'out of memory' after RenderBin::draw(,)

         

        Then the following printed continuously as the program is running:

         

        RenderStage::drawInner(,) FBO status= 0x8cd7

        Warning: detected OpenGL errorNo= 0x506 after RenderBin::draw(,)

         

        I've tracked 0x506 to INVALID_FRAMEBUFFER_OPERATION_EXT which does seem 
odd, given that I'm running osgprerender which is a well established example.
         
        I put this down to the new nVidia driver as it seems to have occurred 
after that. Just wanted to know if anyone else was experiencing this.
         

        I'm running Vista Business 32bit using an nVidia 8800GTS 512mb card, 
driver version: 7.15.11.8048

        
________________________________


        

        
*****************************************************************************************
        To view the terms under which this email is distributed, please go to 
http://www.hull.ac.uk/legal/email_disclaimer.html
        
*****************************************************************************************
 

        
________________________________


        

        _______________________________________________
        osg-users mailing list
        osg-users@lists.openscenegraph.org
        
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org
        

<<winmail.dat>>

*****************************************************************************************
To view the terms under which this email is distributed, please go to 
http://www.hull.ac.uk/legal/email_disclaimer.html
*****************************************************************************************
_______________________________________________
osg-users mailing list
osg-users@lists.openscenegraph.org
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org

Reply via email to