Hi Sanat,
But using a set up such as that, I am basically transmitting the entire video
feed to the remote screen.
I am interested in sending the rendering of only 1 of those 3 viewports(1 view
from the compositeViewer), not all 3. (as seen in the attachment below). With
that being the case, does it make more sense to use the image based approach ?
the rendering the image on the master pc and transfering the final image
Or can it still be achieved using the method in the earlier post ?
If your master PC has two VGA/DVI/... outputs (as most graphics cards
now do) you could easily have a first monitor that would have the three
viewports for the local viewer, and only render the bottom left viewport
on the second "monitor" (which would be transmitted to a remote
monitor). Essentially, the box Torben linked to takes a VGA output and
sends it to the remote box, so anything you can do with a separate video
output will work the same with that.
J-S
--
______________________________________________________
Jean-Sebastien Guay [email protected]
http://www.cm-labs.com/
http://whitestar02.webhop.org/
_______________________________________________
osg-users mailing list
[email protected]
http://lists.openscenegraph.org/listinfo.cgi/osg-users-openscenegraph.org
