Ok, thanks. Use "set OSG_NOTIFY_LEVEL=INFO" for most complete results. -- mew
Martin Naylor wrote: > Hi Mike, > > > >>Hi Martin, >> >>Your original port mentioned _two_ separate behaviors: >> >>1) several "cannot change Uniform type" messages. >>2) a glLinkProgram failure infolog about the GPU having GLSL restrictions. >> >>Which one or other or both are you seeing on ATI? > > > I am not seeing anything on the ATI? Just runs in very slow due to software > mode I guess. > > Does this not happen on Linux with an NVidia card anyone? > > > > >>about #1: Do you continue to see the "cannot change Uniform type" on >>either GPU >>with the latest CVS? That message should only occur when running a new- >>format >>.osg with an old OSG v1.0 binary. That message, if it occurs, has nothing >>to do >>with the type of GPU. If you continue to see it with current CVS, >>something is >>wrong in the OSG code that needs to be fixed. > > > Yes I only see the error on the NVidia card that is with the latest CVS? > Just so I don't waste anyones time again ;-) I will clean my OSG folder and > try again just in case its screwed. > > > >>about #2: The infolog is describing limitations of the GPU, there's >>nothing OSG >>can do about that. My ATI laptop's GPU also goes to software mode trying >>to run >>that example, that's just the way it goes; not all GPUs (especially older >>ones) >>are capable of using all the features of GLSL in hardware mode. >> >>I'd really like to fix #1 if you are continuing to see it. Are you? > > Yes :-). Let me go away and check it all out to make sure ;-). > Post back shortly. > > Regards > > Martin. > > > _______________________________________________ > osg-users mailing list > [email protected] > http://openscenegraph.net/mailman/listinfo/osg-users > http://www.openscenegraph.org/ > _______________________________________________ osg-users mailing list [email protected] http://openscenegraph.net/mailman/listinfo/osg-users http://www.openscenegraph.org/
