This shouts driver problem to me. On NVidia when I zoom in the GPU stats (new to 1.2) as well as the cull and draw all stay very low, basically the cost is pretty near constant. There is a slightly higher fill requirement when you zoom in but its still very light on fill demand.
Robert.
On 9/15/06, Colin Rayment <[EMAIL PROTECTED]> wrote:
RobertI noticed when running the osglightpoint example I was getting a step change in performance as I move towards the light points. It goes from about 200Hz immediately down to about 3Hz. Looking at the stats display its the draw that's taking the time. The issue goes away when I change to rendering points instead of solids or wire frame.I'm running Windows XP with an ATI Radeon 9800 and OSG v1.1.I'm not sure if this an OSG or driver problem (it is an ATI card !).Colin
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Robert Osfield
Sent: 15 September 2006 09:49
To: osg users
Subject: Re: [osg-users] LightPointNode performanceHi Brad,________________________________________________________________________
What performance do you get when running the osglightpoint example? With vsync off I get 560Hz with the osglightpoint example.
As for getting the best peformance, you'll certainly get best peformance by balancing the database, grouping the light point into local groups. One LightPoint per LightPointNode certainly won't be efficient though, perhaps 10-100 would be fine. You could experiment with the size of batch that gets the best peformance.
W.r.t storage of data, I wouldn't have though loading from an .osga would make any difference.
Robert.
On 9/15/06, Brad Colbert < [EMAIL PROTECTED]> wrote:Hi folks,
I have a small pageable database (osga) and I'm populating it with light
points. I'm running into a performance issue, which may be totally
understandable, but I just want to make sure it makes sense. There are
790 lights, maybe I shouldn't go any further ;)... anyway they increase
my frame time by 20ms when they are in view.
I added all of the LightPoints to one LightPointNode. Should I create a
LightPoint per LPNode? I would think that dividing it may help the cull
but this is in the draw so I'm starting to think that this is some hard
limit.
Well, any insight would be great. Thanks.
-Brad
---
Renaissance Sciences Corporation
O/M: 480 290-3997
F: 425 675-8044
_______________________________________________
osg-users mailing list
[email protected]
http://openscenegraph.net/mailman/listinfo/osg-users
http://www.openscenegraph.org/
This email has been scanned for all viruses by the MessageLabs Email
Security System.
________________________________________________________________________
The contents of this email (including any attachments) are confidential and may be legally privileged. If you are not the intended recipient of this email, any disclosure, copying, distribution or use of its contents is strictly prohibited, and you should please notify the sender immediately and then delete it (including any attachments) from your system.
_______________________________________________
osg-users mailing list
[email protected]
http://openscenegraph.net/mailman/listinfo/osg-users
http://www.openscenegraph.org/
_______________________________________________ osg-users mailing list [email protected] http://openscenegraph.net/mailman/listinfo/osg-users http://www.openscenegraph.org/
