Hello,
A little OT, but I was hoping someone could help me with this. When I
run osgviewer on my dual monitor Linux machine, it comes up as if it
wanted to be on both screens but only displays on the left one (i.e.
the object seems to be centered on the break between monitors, but I
only get the osgviewer image on the left monitor).
If I press 'f', it first goes to windowed mode, which works fine (I
can move the window to both monitors and it seems to run at the same
speed), then pressing 'f' again it goes to full screen on one monitor
(the one where the window is currently, with the object centered in
the monitor) and finally another 'f' gets it fullscreen across both
monitors. At that point, it really is on both monitors, so it's only
on startup that it seems to think it's on both but only displays on
one...
My system:
AMD Athlon 1600+, 1GB RAM
nVidia GeForce 5200 (I know, old, but that's what I have at the
university for now)
My xorg.conf contains this (among other things), I don't know if it's
ok or not...
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
Option "DisableGLXRootClipping" "True"
Option "TwinView"
Option "MetaModes" "1280x1024,1280x1024; 1280x1024;
1024x768,1024x768; 1024x768
Option "TwinViewOrientation" "RightOf"
Option "SecondMonitorHorizSync" "UseEdidFreqs"
Option "SecondMonitorVertRefresh" "UseEdidFreqs"
EndSection
I would appreciate any help on this. Also, should there be a
command-line option to start osgviewer in a given screen mode
(fuillscreen, window, span both monitors)? I can't seem to find it.
Thanks,
J-S
--
______________________________________________________
Jean-Sebastien Guay [EMAIL PROTECTED]
http://whitestar02.webhop.org/
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
_______________________________________________
osg-users mailing list
osg-users@openscenegraph.net
http://openscenegraph.net/mailman/listinfo/osg-users
http://www.openscenegraph.org/
