I might be wrong in this, but i think: vmix0-channels <Stereo|Multich> (currently Stereo)
Should be set to "Multich" to allow for more then just stereo input/output. On Wed, 16 Feb 2011 00:07:37 +0100, Michal Suchanek <hramr...@centrum.cz> wrote: > Hello > > On 15 February 2011 19:26, Dev Mazumdar <d...@opensound.com> wrote: >> Hi, >> >> Post the output from ossmix and we can perhaps locate some option >> should >> trigger the output from the green jack. >> >> regards >> Dev > > Here is the output of ossmix: > > Selected mixer 0/High Definition Audio 0x11d41882 > Known controls are: > jack.fp-green.mode <mix4|input> (currently mix4) > jack.fp-green.mute ON|OFF (currently OFF) > jack.fp-green.pcm1 [<leftvol>:<rightvol>] (currently 47.9:47.9 dB) > jack.fp-green.select5 <pcm1|pcm2> (currently pcm1) > jack.fp-green.select5-mute ON|OFF (currently OFF) > jack.fp-green.mix3-mute ON|OFF (currently OFF) > jack.green.mode <mix7|input> (currently mix7) > jack.green.mute ON|OFF (currently OFF) > jack.green.pcm2 [<leftvol>:<rightvol>] (currently 47.9:47.9 dB) > jack.green.pcm2-mute ON|OFF (currently OFF) > jack.green.mix3-mute ON|OFF (currently OFF) > jack.blue.mode <mix9|input> (currently mix9) > jack.blue.mute ON|OFF (currently OFF) > jack.blue.pcm1-mute ON|OFF (currently OFF) > jack.blue.mix3-mute ON|OFF (currently OFF) > jack.pink.mode <mix5|input> (currently mix5) > jack.pink.mute ON|OFF (currently OFF) > jack.pink.pcm3 [<leftvol>:<rightvol>] (currently 47.9:47.9 dB) > jack.pink.pcm3-mute ON|OFF (currently OFF) > jack.pink.mix3-mute ON|OFF (currently OFF) > record.select2.select21 [<leftvol>:<rightvol>] (currently 65.9:65.9 > dB) > record.select2.select22 > <fp-mic|mix9|vendor22|mix5|vendor22|vendor22|mix3> (currently fp-mic) > record.select3.select31 [<leftvol>:<rightvol>] (currently 65.9:65.9 > dB) > record.select3.select32 > <fp-mic|mix9|vendor22|mix5|vendor22|vendor22|mix3> (currently fp-mic) > misc.mix11 [<leftvol>:<rightvol>] (currently 47.9:47.9 dB) > misc.select1 <select2|select3> (currently select2) > misc.beep <monovol> (currently 38.9 dB) > misc1 ON|OFF (currently OFF) > misc.select1-mute ON|OFF (currently OFF) > misc.mix12 <select1> (currently select1) > misc.pcm2-mute ON|OFF (currently OFF) > misc.mix3-mute1 ON|OFF (currently OFF) > misc.mix2 <pcm2|mix3> (currently pcm2) > misc.fp-mic [<leftvol>:<rightvol>] (currently 38.9:38.9 dB) > misc.mix9 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB) > misc.mix4 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB) > misc.mix7 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB) > misc.mix5 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB) > misc.vendor22 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB) > misc.mix31 <fp-mic|mix9|mix5|vendor22> (currently fp-mic) > misc.mix32 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB) > misc.pcm3-mute ON|OFF (currently OFF) > misc.mix3-mute2 ON|OFF (currently OFF) > misc.mix6 <pcm3|mix3> (currently pcm3) > misc.pcm1-mute ON|OFF (currently OFF) > misc.mix3-mute3 ON|OFF (currently OFF) > misc.mix8 <pcm1|mix3> (currently pcm1) > misc2 <0.0dB|16.0dB|32.0dB|48.0dB> (currently 0.0dB) > misc3 <0.0dB|16.0dB|32.0dB|48.0dB> (currently 0.0dB) > misc4 <0.0dB|16.0dB|32.0dB|48.0dB> (currently 0.0dB) > vmix0-enable ON|OFF (currently ON) > vmix0-rate <decimal value> (currently 48000) (Read-only) > vmix0-channels <Stereo|Multich> (currently Stereo) > vmix0-src <Fast|High|OFF> (currently Fast) > vmix0-outvol <monovol> (currently 14.0 dB) > vmix0-invol <monovol> (currently 25.0 dB) > vmix0.pcm6 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB) > vmix0.pcm7 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB) > vmix0.pcm8 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB) > vmix0.pcm9 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB) > > Thanks > > Michal > >> >> Michal Suchanek wrote: >>> Hello, >>> >>> I upgrade my mainboard and now I don't get noise but I can't use >>> the >>> back green jack for audio output. >>> >>> I can use the blue jack but when I connect my speakers to the green >>> jack I only get silence whatever I set up in ossxmix. >>> >>> Is there some way to identify the audio codec? From what I know the >>> PCI id is not really of much use for these AC97 things. >>> >>> Does anybody even care? >>> >>> Thanks >>> >>> Michal >>> _______________________________________________ >>> oss-devel mailing list >>> oss-devel@mailman.opensound.com >>> http://mailman.opensound.com/mailman/listinfo/oss-devel >>> >> >> -- >> ---------------------------------------- >> 4Front Technologies, Inc. >> 9826 Beverlywood Street >> Los Angeles, CA 90064 >> >> Tel: (310) 202 8530 Fax: (310) 202 0496 >> ---------------------------------------- >> _______________________________________________ >> oss-devel mailing list >> oss-devel@mailman.opensound.com >> http://mailman.opensound.com/mailman/listinfo/oss-devel >> > _______________________________________________ > oss-devel mailing list > oss-devel@mailman.opensound.com > http://mailman.opensound.com/mailman/listinfo/oss-devel _______________________________________________ oss-devel mailing list oss-devel@mailman.opensound.com http://mailman.opensound.com/mailman/listinfo/oss-devel
