On 16 February 2011 16:37, <o...@lilltiger.se> wrote: > On Wed, 16 Feb 2011 15:23:26 +0100, Michal Suchanek > <hramr...@centrum.cz> wrote: >> On 16 February 2011 15:00, <o...@lilltiger.se> wrote:
>> I do want stereo only, just wanted it routed through the green jack >> as >> is the case for most fixed-routing audio boards. >> >> I am not particularly concerned about the stereo being routed to the >> wrong-colored connector as I found out how to connect the speakers >> already but it's kind of stupid that it cannot use the properly >> colored jack. >> >> I don't think this is a hardware issue. I remember some boards that >> would only output audio through the blue jack but it was some years >> back, this board is quite new. >> >> Thanks >> >> Michal >> >> _______________________________________________ >> oss-devel mailing list >> oss-devel@mailman.opensound.com >> http://mailman.opensound.com/mailman/listinfo/oss-devel > > How meny jacks do the board actually have, as in the output there are > only: > > front panel green > green > blue > pink > > says nothing about any black jacks etc, have you tried to mute the > green one and see of the output from the black stops, might be that the Yes, the blue controls seem to work for the blue jack - both the blue mute and pcm1 mute mutes the output. > driver thinks the black jack actually is the green one. Color blindness > is not an issue to take lightly ;) > Have you used the card under windows, did you get output from the green > jack then? I have Front: green, pink (the green works, pink untested). Back: blue, green, pink I have installed Windows on the same board in the past and did not notice any issue but I am not sure the rear connectors were even used. On 16 February 2011 22:04, Dev Mazumdar <d...@opensound.com> wrote: > Hi, > > > > Looks like your codec mixer will need a dedicated mixer since there is > clearly a device parser issue with your device - some node is > uninitialized and has caused the device parser to go haywire. > > Can you check if your motherboard has a BIOS update?. If so, kindly > apply one and see if that fixes the problems. Yes, there is a bios update which does not specify much detail, as usual. Applying it might be a bit challenging without running Windows but there seems to be some BIOS support for loading updates without an OS running. Thanks Michal _______________________________________________ oss-devel mailing list oss-devel@mailman.opensound.com http://mailman.opensound.com/mailman/listinfo/oss-devel
