On 04/13/2010 11:30 AM, saleh usman wrote:
If I build another waveform on desktop OSSIE and want to run on my board
whether I've to again build complete file system using console-image or
bitbaking of only new waveform related files will work? Actually my board
doesn't have support for any sound out device and I can't check fm-from-file
waveform therefore I want to build another waveform which print output on
console. will ossie lab 1 work fine?
You could create recipes for your new components and build them.
Existing OSSIE components from VT will not work because they do not use
SCA parameters for component startup (and likely a few other issues
revolving around SCA compatibility).
Philip
Saleh
Date: Thu, 1 Apr 2010 10:37:04 -0400
From: [email protected]
To: [email protected]
Subject: Re: embedded ossie dm6446
On 04/01/2010 10:33 AM, saleh usman wrote:
Hi
console-image has been built successfully and /sdr directory is present in file
system image.But as mentioned on page http://www.opensdr.com/node/11 file
/etc/pulse/daemon.conf is not there.
OK, you are now the first person to try this on the dm6446!
Unfortunately, the only hw I can test on is the beagleboard. I'll try
and test my build on it and see if I can see where that file went.
Thanks for your patience.
Also I've board on which linux is already runing so if I replace the already
flashed file system with OE generated will it work or I has to replace old
kernel with OE generated kernel?
As long as you put any modules for your kernel in the rootfs, your
existing kernel should be fine.
Philip
Saleh
Date: Mon, 29 Mar 2010 10:43:24 -0400
From: [email protected]
To: [email protected]
Subject: Re: embedded ossie dm6446
On 03/29/2010 10:31 AM, saleh usman wrote:
Date: Sun, 28 Mar 2010 08:14:21 -0400
From: [email protected]
To: [email protected]
Subject: Re: Boost library issue
On 03/28/2010 08:03 AM, saleh usman wrote:
I'm proceeding now by manually changing AC_CHECK_LIB([boost_filesystem],
[main], [], [AC_MSG_ERROR([cannot find boost_filesystem library.])]).
Two things: Do not build ossie-image. Follow the instructions from the
article at:
http://www.opensdr.com/node/7
I am bitbaking console-image now by following this page but when I bitbake
conosle-image after adding following lines nothing builds more than the first
bitbake of console-image.
NGSTROM_EXTRA_INSTALL = " screen oprofile ossie-fm-from-file "
require /sdr/ossie_collection/conf/distro/include/sane-ossie-revs.inc
BBFILES = "/sdr/openembedded/recipes/*/*.bb
/sdr/ossie_collection/packages/*/*.bb"
BBFILE_COLLECTIONS = "upstream ossie"
BBFILE_PATTERN_upstream = "^/sdr/openembedded/recipes"
BBFILE_PRIORITY_upstream = "5"
BBFILE_PATTERN_ossie = "^/sdr/ossie_collection/packages"
BBFILE_PRIORITY_ossie = "10"
Terminal log follows which is same as the output of the console-image without
adding above lines.
[sa...@localhost ~]$ bitbake console-image
NOTE: Handling BitBake files: \ (8169/8169) [100 %]
NOTE: Parsing finished. 7504 cached, 335 parsed, 330 skipped, 0 masked.
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 3000 of 3005 (ID: 18,
/sdr/openembedded/recipes/images/console-image.bb, do_package_update_index_ipk)
NOTE: Running task 3004 of 3005 (ID: 10,
/sdr/openembedded/recipes/images/console-image.bb, do_rootfs)
NOTE: Running task 3005 of 3005 (ID: 4,
/sdr/openembedded/recipes/images/console-image.bb, do_build)
NOTE: Tasks Summary: Attempted 3005 tasks of which 3002 didn't need to be rerun
and 0 failed.
Do a "bitbake -c clean task-base" then build console-image. (Actually, I
think bitbake -c clean console-image is enough, but my fingers are
trained to clean task-base. When you change the ANGSTROM_EXTRA_INSTALL
var, bitbake does not have a way of seeing the change, so you have to
help it some.)
Philip
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
https://signup.live.com/signup.aspx?id=60969
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
https://signup.live.com/signup.aspx?id=60969
