Hi, If i skip that option and run the command all i get is....
C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_StereoFramework -input.il "band128A .tif" "band128F.tif" -output.res 2 -output.out "dem.tif" -elev.default 100 -pos tproc.med 1 -stereorect.fwdgridstep 8 -stereorect.invgridssrate 4 -bm.maxhoffset 20 -bm.minhoffset -20 -bm.radius 3 2014 Jan 10 16:03:38 : Application.logger (INFO) Elevation management: setting default height above ellipsoid to 100 meters 2014 Jan 10 16:03:38 : Application.logger (INFO) 1 Stereo couples will be processed 2014 Jan 10 16:03:38 : Application.logger (INFO) Processing stereo couple 0 (images index 0 and 1) Computing epipolar grids...: 100% [**************************************************] (0.2 seconds) 2014 Jan 10 16:03:39 : Application.logger (INFO) Minimum disparity : -0 2014 Jan 10 16:03:39 : Application.logger (INFO) Maximum disparity : 0 Inverting left deformation field ...: 100% [**************************************************] (0.05 seconds) 2014 Jan 10 16:03:39 : Application.logger (INFO) Using robust SSD Metric for BlockMatching. 2014 Jan 10 16:03:39 : Application.logger (INFO) Using reverse block-matching to filter incoherent disparity values. 2014 Jan 10 16:03:39 : Application.logger (INFO) Default elevation set for Min/Max elevation : 100 2014 Jan 10 16:03:39 : Application.logger (INFO) Minimum elevation found : 100 2014 Jan 10 16:03:39 : Application.logger (INFO) Maximum elevation found : 100 2014 Jan 10 16:03:39 : Application.logger (INFO) Disparity mask formula : if((hdisp > -0) and (hdisp < 0) and (mask>0),255,0) 2014 Jan 10 16:03:39 : Application.logger (INFO) Output DSM parameters are estimated from sensor input data. 2014 Jan 10 16:03:39 : Application.logger (INFO) Output DSM projection reference: GEOGCS["WGS 84",DATUM["WGS_1984",SPHEROID["WGS 84",6378137,298.257223563,AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]],PRIMEM["Greenwich",0,AUTH ORITY["EPSG","8901"]],UNIT["degree",0.0174532925199433,AUTHORITY["EPSG","9122"]],AUTHORITY["EPSG","4326"]] 2014 Jan 10 16:03:40 : Application.logger (FATAL) The following error occurred during application execution : bad allocation On Friday, January 10, 2014 3:49:34 PM UTC+5:30, Jonathan Guinet wrote: > > Hi, > > in your test command you explicitly ignore by using extended filaname [1] > skipcarto > > C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_StereoFramework > -input.il"band128A.tif? > *&skipcarto=true*" > > where your geo info seems to be correct , coouèld it be possible to > relaunch without this option > > [1] > http://wiki.orfeo-toolbox.org/index.php/ExtendedFileName<http://www.google.com/url?q=http%3A%2F%2Fwiki.orfeo-toolbox.org%2Findex.php%2FExtendedFileName&sa=D&sntz=1&usg=AFQjCNFCenNohDwZwjbyIiu9-5SOhk1ssQ> > > > > 2014/1/10 Sunny Depp <[email protected] <javascript:>> > >> Hi Jonathan, >> >> and if i reduce the size to 128x128 for both images and run the >> stereoframework as >> >> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_StereoFramework >> -input.il"band128A.tif?&skipcarto=true" "band128F.tif?&skipcarto=true" >> -output.res >> 2 -o >> utput.out "dem.tif" -elev.default 100 -postproc.med 1 >> -stereorect.fwdgridstep 8 -stereorect.invgridssrate 4 -bm.maxhoffset 20 >> -bm.minhoffset -20 -bm.r >> adius 3 >> >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Elevation management: >> setting default height above ellipsoid to 100 meters >> 2014 Jan 10 15:38:07 : Application.logger (INFO) 1 Stereo couples >> will be processed >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Processing stereo >> couple 0 (images index 0 and 1) >> Computing epipolar grids...: 100% >> [**************************************************] (0.2 seconds) >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Minimum disparity : -0 >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Maximum disparity : 0 >> Inverting left deformation field ...: 100% >> [**************************************************] (0.05 seconds) >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Using robust SSD >> Metric for BlockMatching. >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Using reverse >> block-matching to filter incoherent disparity values. >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Default elevation set >> for Min/Max elevation : 100 >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Minimum elevation >> found : 100 >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Maximum elevation >> found : 100 >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Disparity mask >> formula : if((hdisp > -0) and (hdisp < 0) and (mask>0),255,0) >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Output DSM parameters >> are estimated from sensor input data. >> 2014 Jan 10 15:38:07 : Application.logger (INFO) Output DSM projection >> reference: >> GEOGCS["WGS 84",DATUM["WGS_1984",SPHEROID["WGS >> 84",6378137,298.257223563,AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]],PRIMEM["Greenwich",0,AUTH >> >> ORITY["EPSG","8901"]],UNIT["degree",0.0174532925199433,AUTHORITY["EPSG","9122"]],AUTHORITY["EPSG","4326"]] >> Writing dem.tif...: 0% [ >> ] >> >> >> I get this and dem file is writing but i dont see any progress here but >> the file size is increasing and going on till 32GB.. i felt somewhat >> strange so stopped the execution. can u clarify me why this is happening ? >> >> >> Thanks >> >> On Wednesday, January 8, 2014 1:51:33 PM UTC+5:30, Jonathan Guinet wrote: >> >>> Hi Sandeep >>> >>> could it be possible to send image information using for example >>> otbcli_ReadImageInfo -in BANDA100.tif -outkwl BANDA 100.geom >>> >>> thanks >>> >>> >>> >>> >>> 2014/1/8 Sunny Depp <[email protected]> >>> >>>> >>>> Hi Everyone, >>>> >>>> I'm new to the orfeo toolbox , installed directly from OSGEO4W I'm >>>> trying to extract a DTM from cartosat stereo pair. However, I'm running >>>> into a bit of trouble down the line. I'm following the OTB Cookbook >>>> example >>>> for VHR images. >>>> >>>> i had followed this thread (https://groups.google.com/ >>>> forum/#!searchin/otb-users/stereo/otb-users/kocntH7LjO8/ZIgLpI7EFJgJ) and >>>> successfully generated DEM from the inputs which i downloaded from OTB >>>> Data, but for the Cartosat stereo pair which i have, i am doing the >>>> stereoframework on this pair i am getting error as: >>>> >>>> Using ExtractROI i had extracted images to size 1024 from original >>>> BANDA and BANDF images and applied stereoframework on these images. >>>> >>>> >>>> >>>> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_StereoFramework >>>> -input.il"BANDA100.tif" "BANDF100.tif" -elev.default 50 -output.out >>>> "dem.tif" >>>> -output.res 20 -postproc.med 1 -stereorect.fwdgridstep 8 >>>> -stereorect.invgridssrate 4 >>>> >>>> 2014 Jan 08 12:48:14 : Application.logger (INFO) Elevation >>>> management: setting default height above ellipsoid to 50 meters >>>> 2014 Jan 08 12:48:14 : Application.logger (INFO) 1 Stereo couples >>>> will be processed >>>> 2014 Jan 08 12:48:14 : Application.logger (INFO) Processing stereo >>>> couple 0 (images index 0 and 1) >>>> Computing epipolar grids...: 100% >>>> [**************************************************] >>>> (0.2 seconds) >>>> 2014 Jan 08 12:48:14 : Application.logger (INFO) Minimum disparity : >>>> -0 >>>> 2014 Jan 08 12:48:14 : Application.logger (INFO) Maximum disparity : >>>> 0 >>>> Inverting left deformation field ...: 100% >>>> [**************************************************] (5e+001 seconds) >>>> 2014 Jan 08 12:49:08 : Application.logger (INFO) Using robust SSD >>>> Metric for BlockMatching. >>>> 2014 Jan 08 12:49:08 : Application.logger (INFO) Using reverse >>>> block-matching to filter incoherent disparity values. >>>> 2014 Jan 08 12:49:08 : Application.logger (INFO) Default elevation >>>> set for Min/Max elevation : 50 >>>> 2014 Jan 08 12:49:08 : Application.logger (INFO) Minimum elevation >>>> found : 50 >>>> 2014 Jan 08 12:49:08 : Application.logger (INFO) Maximum elevation >>>> found : 50 >>>> 2014 Jan 08 12:49:08 : Application.logger (INFO) Disparity mask >>>> formula : if((hdisp > -0) and (hdisp < 0) and (mask>0),255,0) >>>> 2014 Jan 08 12:49:08 : Application.logger (INFO) Output DSM >>>> parameters are estimated from sensor input data. >>>> 2014 Jan 08 12:49:08 : Application.logger (INFO) Output DSM >>>> projection reference: >>>> GEOGCS["WGS84",DATUM["WGS_1984",SPHEROID["WGS84",6378137,298.257223563, >>>> AUTHORITY["EPSG","7030"]],AUTHORITY["EPSG","6326"]], >>>> PRIMEM["Greenwich",0,AUTHORITY["EPSG","8901"]],UNIT["degree",0. >>>> 0174532925199433,AUTHORITY["EPSG","9122"]],AUTHORITY["EPSG","4326"]] >>>> 2014 Jan 08 12:49:10 : Application.logger (FATAL) The following >>>> error occurred during application execution : bad allocation >>>> >>>> >>>> So i had followed this http://orfeo-toolbox.org/ >>>> CookBook/CookBooksu41.html#tailCookBooksu41.html step by step. still i >>>> am getting error at otbcli_DisparityMapToElevationMap step >>>> >>>> >>>> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_ >>>> StereoRectificationGridGenerator -io.inleft >>>> "BANDA100.tif?&geom=BANDA100.geom" -io.inright "BANDF100.tif? >>>> &geom=BANDF100.geom"-epi.elevation.dem srtm_directory\ >>>> -epi.elevation.geoid egm96.grd -epi.step 20 -io.outleft SRGG_A.tif >>>> -io.outright SRGG_F.tif >>>> >>>> 2014 Jan 08 01:00:47 : Application.logger (INFO) Elevation >>>> management: setting default height above ellipsoid to 0 meters >>>> 2014 Jan 08 01:00:48 : Application.logger (INFO) Elevation >>>> management: using geoid file (egm96.grd) >>>> 2014 Jan 08 01:00:48 : Application.logger (INFO) Elevation >>>> management: using DEM directory (srtm_directory\) >>>> Computing epipolar grids ...: 100% >>>> [**************************************************] >>>> (0.3 seconds) >>>> Writing SRGG_A.tif...: 100% >>>> [**************************************************] >>>> (0.2 seconds) >>>> Writing SRGG_F.tif...: 100% >>>> [**************************************************] >>>> (0.2 seconds) >>>> Output parameters value: >>>> epi.rectsizex: 1024 >>>> epi.rectsizey: 1024 >>>> epi.baseline: 0 >>>> >>>> >>>> >>>> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_GridBasedImageResampling - >>>> io.in BANDA100.tif -io.out GBIR_A.tif -grid.in SRGG_A.tif -out.sizex >>>> 1024 -out. >>>> sizey 1024 >>>> >>>> Writing GBIR_A.tif...: 100% >>>> [**************************************************] >>>> (0.9 seconds) >>>> >>>> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_GridBasedImageResampling - >>>> io.in BANDF100.tif -io.out GBIR_F.tif -grid.in SRGG_F.tif -out.sizex >>>> 1024 -out. >>>> sizey 1024 >>>> >>>> Writing GBIR_F.tif...: 100% >>>> [**************************************************] >>>> (0.9 seconds) >>>> >>>> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_BandMath -il GBIR_A.tif >>>> -out BM_A.tif -exp "if(im1b1<=0,0,255)" >>>> >>>> 2014 Jan 08 02:03:52 : Application.logger (INFO) Image #1 has 1 >>>> components >>>> >>>> Writing BM_A.tif...: 100% >>>> [**************************************************] >>>> (0.3 seconds) >>>> >>>> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_BandMath -il GBIR_F.tif >>>> -out BM_F.tif -exp "if(im1b1<=0,0,255)" >>>> >>>> 2014 Jan 08 02:04:06 : Application.logger (INFO) Image #1 has 1 >>>> components >>>> >>>> Writing BM_F.tif...: 100% >>>> [**************************************************] >>>> (0.3 seconds) >>>> >>>> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_BlockMatching -io.inleft >>>> GBIR_A.tif -io.inright GBIR_F.tif -io.out disparity_map_ncc.tif -bm.minhd >>>> -45 -b >>>> m.maxhd 5 -bm.minvd 1 -bm.maxvd 1 -mask.inleft BM_A.tif -mask.inright >>>> BM_F.tif -io.outmetric 1 -bm.metric ncc -bm.subpixel dichotomy >>>> -bm.medianfilter. >>>> radius 5 -bm.medianfilter.incoherence 2.0 >>>> >>>> 2014 Jan 08 02:10:45 : Application.logger (INFO) Masking criterion >>>> on left image: if(inmask > 0,255,0) >>>> 2014 Jan 08 02:10:45 : Application.logger (INFO) Masking criterion >>>> on right image: if(inmask > 0,255,0) >>>> 2014 Jan 08 02:10:45 : Application.logger (INFO) Applies a median >>>> filter to smooth the disparity map >>>> >>>> NCC block matching: 100% >>>> [**************************************************] >>>> (3e+001 seconds) >>>> Sub-pixel refinement: 100% >>>> [**************************************************] >>>> (9e+001 seconds) >>>> Writing disparity_map_ncc.tif...: 100% >>>> [**************************************************] >>>> (1e+002 seconds) >>>> >>>> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_BandMath -il >>>> disparity_map_ncc.tif -out thres_hdisparity.tif uint8 -exp >>>> "if(im1b3>0.9,255,0)" >>>> >>>> 2014 Jan 08 02:15:03 : Application.logger (INFO) Image #1 has 3 >>>> components >>>> >>>> Writing thres_hdisparity.tif...: 100% >>>> [**************************************************] >>>> (0.4 seconds) >>>> >>>> >>>> C:\Users\Sandeep\Desktop\OTB\PRODUCT1>otbcli_DisparityMapToElevationMap >>>> -io.in disparity_map_ncc.tif -io.left BANDA100.tif -io.right >>>> BANDF100.tif -io.lgrid SRGG_A.tif -io.rgrid SRGG_F.tif -io.mask >>>> thres_hdisparity.tif -io.out disparity_map_ssd_to_elevation.tif >>>> -hmin 10 -hmax 400 -elev.default 50 >>>> >>>> 2014 Jan 08 02:26:29 : Application.logger (INFO) Elevation >>>> management: setting default height above ellipsoid to 50 meters >>>> 2014 Jan 08 02:26:29 : Application.logger (INFO) Elevation map >>>> origin : [271886,2.16958e+006] >>>> >>>> 2014 Jan 08 02:26:29 : Application.logger (INFO) Elevation map size >>>> : [19966642,51874882] >>>> >>>> 2014 Jan 08 02:26:30 : Application.logger (FATAL) The following >>>> error occurred during application execution : bad allocation >>>> >>>> >>>> How do i interpret this error? and does this OTB work on Cartosat >>>> Stereo images. I am struck in this. >>>> >>>> >>>> Thanks in advance, >>>> Sandeep. >>>> >>>> -- >>>> -- >>>> Check the OTB FAQ at >>>> http://www.orfeo-toolbox.org/FAQ.html >>>> >>>> You received this message because you are subscribed to the Google >>>> Groups "otb-users" group. >>>> To post to this group, send email to [email protected] >>>> >>>> To unsubscribe from this group, send email to >>>> [email protected] >>>> >>>> For more options, visit this group at >>>> http://groups.google.com/group/otb-users?hl=en >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "otb-users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- >> -- >> Check the OTB FAQ at >> http://www.orfeo-toolbox.org/FAQ.html >> >> You received this message because you are subscribed to the Google >> Groups "otb-users" group. >> To post to this group, send email to [email protected]<javascript:> >> To unsubscribe from this group, send email to >> [email protected] <javascript:> >> For more options, visit this group at >> http://groups.google.com/group/otb-users?hl=en >> --- >> You received this message because you are subscribed to the Google Groups >> "otb-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- -- Check the OTB FAQ at http://www.orfeo-toolbox.org/FAQ.html You received this message because you are subscribed to the Google Groups "otb-users" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/otb-users?hl=en --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
