Hi, I'm trying to use the command in this way:
otbcli_ReadImageInfo -in VRSS-1_PAN-1_0157_0171_20150226_L2B_0000021303.tif
-outkwl ./PAN.geom
But it not generate the PAN.geom file, in stead of that show this in the
bash
2015 Jun 19 12:11:57 : Application.logger (INFO)
Image general informations:
Number of bands : 1
Start index : [0,0]
Size : [16142,15593]
Origin : [332979,1.21434e+06]
Spacing : [2.5,-2.5]
Estimated ground spacing (in meters): [2.49736,2.51344]
Image acquisition informations:
Sensor :
Image identification number:
Image projection : PROJCS["WGS 84 / UTM zone 20N",
GEOGCS["Ellipse_WGS_84",
DATUM["unknown",
SPHEROID["WGS 84",6378137,298.257223563,
AUTHORITY["EPSG","7030"]]],
PRIMEM["Greenwich",0],
UNIT[,0.0174532925199433]],
PROJECTION["Transverse_Mercator"],
PARAMETER["latitude_of_origin",0],
PARAMETER["central_meridian",-63],
PARAMETER["scale_factor",0.9996],
PARAMETER["false_easting",500000],
PARAMETER["false_northing",0],
UNIT["metre",1,
AUTHORITY["EPSG","9001"]],
AUTHORITY["EPSG","32620"]]
Image default RGB composition:
[R, G, B] = [0,1,2]
Ground control points information:
Number of GCPs = 0
GCPs projection =
Output parameters value:
indexx: 0
indexy: 0
sizex: 16142
sizey: 15593
spacingx: 2.5
spacingy: -2.5
originx: 332979.1562
originy: 1214341.625
estimatedgroundspacingx: 2.497357607
estimatedgroundspacingy: 2.513441801
numberbands: 1
sensor:
id:
time:
ullat: 0
ullon: 0
urlat: 0
urlon: 0
lrlat: 0
lrlon: 0
lllat: 0
lllon: 0
town:
country:
rgb.r: 0
rgb.g: 1
rgb.b: 2
projectionref: PROJCS["WGS 84 / UTM zone 20N",
GEOGCS["Ellipse_WGS_84",
DATUM["unknown",
SPHEROID["WGS 84",6378137,298.257223563,
AUTHORITY["EPSG","7030"]]],
PRIMEM["Greenwich",0],
UNIT[,0.0174532925199433]],
PROJECTION["Transverse_Mercator"],
PARAMETER["latitude_of_origin",0],
PARAMETER["central_meridian",-63],
PARAMETER["scale_factor",0.9996],
PARAMETER["false_easting",500000],
PARAMETER["false_northing",0],
UNIT["metre",1,
AUTHORITY["EPSG","9001"]],
AUTHORITY["EPSG","32620"]]
keyword:
gcp.count: 0
gcp.proj:
gcp.ids:
gcp.info:
gcp.imcoord:
gcp.geocoord:
I don't know what to do to solve this, I need the PAM.geom to use it in
otbcli_RefineSensorModel command.
Thanks for your help
Tomás
--
--
Check the OTB FAQ at
http://www.orfeo-toolbox.org/FAQ.html
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/otb-users?hl=en
---
You received this message because you are subscribed to the Google Groups
"otb-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
