On Sat, Dec 12, 2009 at 12:41 AM, <[email protected]> wrote: > My aim is to install a standalone node on the following hardware & run the > management server in one of it's VMs. > > Dell Poweredge 2950 > PERC 6/i RAID0 6x: 25G / 1T / 4.4T > Dual Xeon 5470 quad-core 3.3GHz / 20G RAM > Dual onboard Broadcom NetXtreme II BCM5708 NICs
Looks like driver for that NIC failed to load, please go to Shell option and check in dmesg for errors probably due to missing firmware. There was a patch just after 1.0.2 release which fixes firmware missing in the image: http://git.fedorahosted.org/git/ovirt/?p=ovirt/node-image.git;a=commitdiff;h=4134abf597efbc7bb8c13772eca69d8c94eb3df5 1.0.3 should be out next week, but in the meantime you can try building ovirt-node-image from "next" branch. > I downloaded the oVirt Node 1.0.2-1.fc11.x86_64 iso from the website & boot > in standalone mode per instructions on the wiki. > > When entering the "4) Networking Setup" menu, there aren't any devices > present: > > Physical Networking Devices (*=PXE boot interface) > Name Driver MAC > 1) DNS 3) Abort > 2) NTP 4) Save And Return To Menu > Please select an interface or configuration option: _ _______________________________________________ Ovirt-devel mailing list [email protected] https://www.redhat.com/mailman/listinfo/ovirt-devel
