dmesg|grep "firmware" bnx2: 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw bnx2: Can't load firmware file "bnx2/bnx2-mips-06-4.6.16.fw" bnx2: 0000:07:00.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw bnx2: Can't load firmware file "bnx2/bnx2-mips-06-4.6.16.fw"
- thanks. On Sat, 12 Dec 2009 02:03 +0100, "Alan Pevec" <[email protected]> wrote: > On Sat, Dec 12, 2009 at 12:41 AM, <[email protected]> wrote: > > My aim is to install a standalone node on the following hardware & run the > > management server in one of it's VMs. > > > > Dell Poweredge 2950 > > PERC 6/i RAID0 6x: 25G / 1T / 4.4T > > Dual Xeon 5470 quad-core 3.3GHz / 20G RAM > > Dual onboard Broadcom NetXtreme II BCM5708 NICs > > Looks like driver for that NIC failed to load, please go to Shell > option and check in dmesg for errors > probably due to missing firmware. There was a patch just after 1.0.2 > release which fixes firmware missing in the image: > http://git.fedorahosted.org/git/ovirt/?p=ovirt/node-image.git;a=commitdiff;h=4134abf597efbc7bb8c13772eca69d8c94eb3df5 > 1.0.3 should be out next week, but in the meantime you can try > building ovirt-node-image from "next" branch. > > > I downloaded the oVirt Node 1.0.2-1.fc11.x86_64 iso from the website & boot > > in standalone mode per instructions on the wiki. > > > > When entering the "4) Networking Setup" menu, there aren't any devices > > present: > > > > Physical Networking Devices (*=PXE boot interface) > > Name Driver MAC > > 1) DNS 3) Abort > > 2) NTP 4) Save And Return To Menu > > Please select an interface or configuration option: _ _______________________________________________ Ovirt-devel mailing list [email protected] https://www.redhat.com/mailman/listinfo/ovirt-devel
