On 11/9/26 7:15 PM, Rosemarie O'Riorden wrote:
> Hi Sasha,
> 
> Thanks for the new version! Sorry I didn't see this sooner, it would be
> great if you could CC reviewers (me & Dumitru in this case) so we don't
> miss it. Also no reason to include or CC the anthropic noreply email. I
> think Assisted-by will be deprecated soon anyways (I guess someone just
> needs to post a patch to do it lol), but until then you can leave out
> that email.
> 
> Acked-by: Rosemarie O'Riorden <[email protected]>
> 

Hi Sasha, Rosemarie,

Thanks for the new version and review!

This generally looks OK to me but please see below for some minor
comments.  While minor, the documentation related comments are something
I don't really want to squash in myself without additional review.

Could you please send a v3?

Thanks,
Dumitru

> On 10/28/26 4:57 PM, Alexandra Rukomoinikova via dev wrote:
>> Mirroring of type "lport" was done after ingress port security and
>> before egress port security, so the mirror did not show the traffic
>> that was really present on the port.  For example, if a VM is
>> compromised and sends packets with a spoofed source MAC, port security
>> drops them and they never reach the mirror target, although this is
>> exactly the traffic one would want to see.  In the egress direction it
>> is the opposite: packets destined to a MAC address that is not allowed
>> on the port are dropped by egress port security and never delivered to
>> the VM, but they were still mirrored, so the mirror target saw traffic
>> that the port never received.
>>
>> Mirror the traffic as close to the interface as possible, so that the
>> mirror target sees what the port actually sends and receives.
>>
>> Fixes: 2a2fe266d09c ("northd: Added support for port mirroring in OVN 
>> overlay.")
>> Signed-off-by: Alexandra Rukomoinikova <[email protected]>
>> Assisted-by: Claude Opus 5.5 <[email protected]>
>> ---
>>  Documentation/ref/ovn-logical-flows.7.rst | 107 +++++++++++-----------
>>  NEWS                                      |   6 ++
>>  lib/ovn-util.c                            |   4 +-
>>  northd/northd.c                           |  11 ++-
>>  northd/northd.h                           |  21 ++---
>>  ovn-nb.xml                                |  12 +++
>>  tests/ovn-northd.at                       |  62 ++++++-------
>>  tests/ovn-util.at                         |   4 +-
>>  tests/ovn.at                              |  22 ++---
>>  9 files changed, 134 insertions(+), 115 deletions(-)
>>
>> diff --git a/Documentation/ref/ovn-logical-flows.7.rst 
>> b/Documentation/ref/ovn-logical-flows.7.rst
>> index 913ebbc83..c1df023e6 100644
>> --- a/Documentation/ref/ovn-logical-flows.7.rst
>> +++ b/Documentation/ref/ovn-logical-flows.7.rst
>> @@ -16,10 +16,29 @@ Logical Switch Datapaths
>>  
>>  .. _ls-in-0:
>>  
>> -Ingress Table 0: Admission Control and Ingress Port Security check
>> +Ingress Table 0: Mirror
>> +~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +Overlay remote mirror table contains the following logical flows:
>> +
>> +- For each logical switch port with an attached mirror, a logical flow with 
>> a
>> +  priority of 100 is added. This flow matches all incoming packets to the
>> +  attached port, clones them, and forwards the cloned packets to the mirror
>> +  target port.
>> +
>> +- A priority 0 flow is added which matches on all packets and applies the
>> +  action ``next;``.
>> +
>> +- A logical flow added for each Mirror Rule in Mirror table attached to 
>> logical
>> +  switch ports, matches all incoming packets that match rules and clones the
>> +  packet and sends cloned packet to mirror target port.
>> +
>> +.. _ls-in-1:
>> +
>> +Ingress Table 1: Admission Control and Ingress Port Security check
>>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  
>> -Ingress table 0 contains these logical flows:
>> +Ingress table 1 contains these logical flows:
>>  
>>  - Priority 100 flows to drop packets with VLAN tags or multicast Ethernet 
>> source
>>    addresses.
>> @@ -61,9 +80,9 @@ Ingress table 0 contains these logical flows:
>>    applies the port security rules defined in the ``port_security`` column of
>>    ``Logical_Switch_Port`` table.
>>  
>> -.. _ls-in-1:
>> +.. _ls-in-2:
>>  
>> -Ingress Table 1: Ingress Port Security - Apply
>> +Ingress Table 2: Ingress Port Security - Apply
>>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  

Some parts of this section still use table 1.

>>  For each logical switch port *P* of type router connected to a gw router a
>> @@ -98,25 +117,6 @@ Ingress table 1 contains these logical flows:
>>  - One priority-0 fallback flow that matches all packets and advances to the 
>> next
>>    table.
>>  
>> -.. _ls-in-2:
>> -
>> -Ingress Table 2: Mirror
>> -~~~~~~~~~~~~~~~~~~~~~~~~
>> -
>> -Overlay remote mirror table contains the following logical flows:
>> -
>> -- For each logical switch port with an attached mirror, a logical flow with 
>> a
>> -  priority of 100 is added. This flow matches all incoming packets to the
>> -  attached port, clones them, and forwards the cloned packets to the mirror
>> -  target port.
>> -
>> -- A priority 0 flow is added which matches on all packets and applies the 
>> action
>> -  ``next;``.
>> -
>> -- A logical flow added for each Mirror Rule in Mirror table attached to 
>> logical
>> -  switch ports, matches all incoming packets that match rules and clones the
>> -  packet and sends cloned packet to mirror target port.
>> -
>>  .. _ls-in-3:
>>  
>>  Ingress Table 3: Lookup MAC address learning table
>> @@ -1827,34 +1827,15 @@ This is similar to ingress table :ref:`ACL action 
>> <ls-in-11>`.
>>  
>>  .. _ls-out-9:
>>  
>> -Egress Table 9: Mirror
>> -~~~~~~~~~~~~~~~~~~~~~~~~
>> -
>> -Overlay remote mirror table contains the following logical flows:
>> -
>> -- For each logical switch port with an attached mirror, a logical flow with 
>> a
>> -  priority of 100 is added. This flow matches all outcoming packets to the

Nit: s/outcoming/outgoing/

>> -  attached port, clones them, and forwards the cloned packets to the mirror
>> -  target port.
>> -
>> -- A priority 0 flow is added which matches on all packets and applies the 
>> action
>> -  ``next;``.
>> -
>> -- A logical flow added for each Mirror Rule in Mirror table attached to 
>> logical
>> -  switch ports, matches all outcoming packets that match rules and clones 
>> the

Same here.

>> -  packet and sends cloned packet to mirror target port.
>> -

>From my AI helper:

Several existing cross-references in ovn-logical-flows.7.rst now
point to the wrong sections because the stage numbers shifted.
Specifically:

In the egress pipeline, the ":ref:" labels ls-out-9 through
ls-out-15 shifted by one.  These references were not updated:

  - ":ref:`Stateful <ls-out-12>`" (in the Ingress Network Function
    section) should be "<ls-out-11>" since Stateful is now table 11.
  - ":ref:`Network Function <ls-out-13>`" appears four times
    (around egress Pre-LB, egress ACL-eval, and egress
    Pre-Stateful sections) and should be "<ls-out-12>" since
    Network Function is now table 12.

In the ingress pipeline:

  - ":ref:`... check <ls-in-0>`" (in the egress Check Port
    Security section) should be "<ls-in-1>" since Admission
    Control / Port Security check is now table 1.
  - ":ref:`Ingress Port Security - Apply <ls-in-1>`" (in the
    egress Apply Port Security section) should be "<ls-in-2>"
    since Port Security Apply is now table 2.

Additionally, the Egress Table 14 (Apply Port Security) section
still describes actions as "set_queue(id); output;" and says
"A priority-0 flow that outputs the packet to the outport",
but the code now generates "next;" instead of "output;" for
these flows, since port security is no longer the last stage.

>> -.. _ls-out-10:
>> -
>> -Egress Table 10: ``to-lport`` QoS
>> +Egress Table 9: ``to-lport`` QoS
>>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  
>>  This is similar to ingress table :ref:`QoS <ls-in-12>` except they apply to
>>  ``to-lport`` QoS rules.
>>  
>> -.. _ls-out-11:
>> +.. _ls-out-10:
>>  
>> -Egress Table 11: Pre Network Function
>> +Egress Table 10: Pre Network Function
>>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  
>>  This stage selects the active network function from a 
>> ``Network_Function_Group``
>> @@ -1906,9 +1887,9 @@ support network function load balancing.
>>  - In inline, vtap mode: A priority-0 flow that simply moves traffic to the 
>> next
>>    table.
>>  
>> -.. _ls-out-12:
>> +.. _ls-out-11:
>>  
>> -Egress Table 12: Stateful
>> +Egress Table 11: Stateful
>>  ~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  
>>  This is similar to ingress table :ref:`Stateful <ls-in-24>` except that 
>> there
>> @@ -1926,9 +1907,9 @@ connection tracking.
>>    when it comes out of the other port of the network function (required for
>>    cross host traffic redirection for VLAN subnet).
>>  
>> -.. _ls-out-13:
>> +.. _ls-out-12:
>>  
>> -Egress Table 13: Network Function
>> +Egress Table 12: Network Function
>>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  
>>  This table handles request packets for ``to-lport`` ACLs and response 
>> packets
>> @@ -2000,9 +1981,9 @@ in ``ct_label.nf_id`` during request processing.
>>  - In inline, vtap mode: One priority-0 flow same as ingress :ref:`Network
>>    Function <ls-in-25>`.
>>  
>> -.. _ls-out-14:
>> +.. _ls-out-13:
>>  
>> -Egress Table 14: Egress Port Security - check
>> +Egress Table 13: Egress Port Security - check
>>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  
>>  This is similar to the port security logic in table :ref:`Ingress Port 
>> Security
>> @@ -2022,9 +2003,9 @@ port security rules.  This table adds the below 
>> logical flows.
>>    addresses defined in the ``port_security`` column of 
>> ``Logical_Switch_Port``
>>    table before delivering the packet to the ``outport``.
>>  
>> -.. _ls-out-15:
>> +.. _ls-out-14:
>>  
>> -Egress Table 15: Egress Port Security - Apply
>> +Egress Table 14: Egress Port Security - Apply
>>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>  
>>  This is similar to the ingress port security logic in ingress table
>> @@ -2052,6 +2033,26 @@ The following flows are added.
>>  
>>  - A priority-0 flow that outputs the packet to the ``outport``.
>>  
>> +.. _ls-out-15:
>> +
>> +Egress Table 15: Mirror
>> +~~~~~~~~~~~~~~~~~~~~~~~~
>> +
>> +Overlay remote mirror table contains the following logical flows:
>> +
>> +- For each logical switch port with an attached mirror, a logical flow with 
>> a
>> +  priority of 100 is added. This flow matches all outcoming packets to the
>> +  attached port, clones them, and forwards the cloned packets to the mirror
>> +  target port.
>> +
>> +- A priority 0 flow is added which matches on all packets and applies the
>> +  action ``output;``.
>> +
>> +- A logical flow added for each Mirror Rule in Mirror table attached to 
>> logical
>> +  switch ports, matches all outcoming packets that match rules and clones 
>> the
>> +  packet and sends cloned packet to mirror target port.
>> +
>> +
>>  .. _lr-datapaths:
>>  
>>  Logical Router Datapaths
>> diff --git a/NEWS b/NEWS
>> index 4176f8d7f..cc005be1d 100644
>> --- a/NEWS
>> +++ b/NEWS
>> @@ -170,6 +170,12 @@ OVN v26.09.0 - xxx xx xxxx
>>       change handlers, so a change is reconciled in place instead of 
>> re-running
>>       the whole ovn-ic computation.  The "inc-engine/show-stats" command
>>       reports the per-node recompute counters.
>> +   - Mirrors of type "lport" now mirror the traffic that is really present
>> +     on the logical port: "from-lport" traffic is mirrored in the first
>> +     ingress table, before port security, and "to-lport" traffic in the last
>> +     egress table, after port security.  Packets dropped by ingress port
>> +     security are now mirrored, while packets dropped by egress port
>> +     security are not mirrored anymore.
>>  
>>  OVN v26.03.0 - xxx xx xxxx
>>  --------------------------
>> diff --git a/lib/ovn-util.c b/lib/ovn-util.c
>> index eb1fa8a06..fd9b40563 100644
>> --- a/lib/ovn-util.c
>> +++ b/lib/ovn-util.c
>> @@ -1007,8 +1007,8 @@ ip_address_and_port_from_lb_key(const char *key, char 
>> **ip_address,
>>   *
>>   * NOTE: If OVN_NORTHD_PIPELINE_CSUM is updated make sure to double check
>>   * whether an update of OVN_INTERNAL_MINOR_VER is required. */
>> -#define OVN_NORTHD_PIPELINE_CSUM "3980195012 11262"
>> -#define OVN_INTERNAL_MINOR_VER 16
>> +#define OVN_NORTHD_PIPELINE_CSUM "451923473 11267"
>> +#define OVN_INTERNAL_MINOR_VER 17
>>  
>>  /* Returns the OVN version. The caller must free the returned value. */
>>  char *
>> diff --git a/northd/northd.c b/northd/northd.c
>> index 3f59894bd..e4853b954 100644
>> --- a/northd/northd.c
>> +++ b/northd/northd.c
>> @@ -6414,7 +6414,7 @@ build_mirror_default_lflow(struct ovn_datapath *od,
>>                             struct lflow_table *lflows)
>>  {
>>      ovn_lflow_add(lflows, od, S_SWITCH_IN_MIRROR, 0, "1", "next;", NULL);
>> -    ovn_lflow_add(lflows, od, S_SWITCH_OUT_MIRROR, 0, "1", "next;", NULL);
>> +    ovn_lflow_add(lflows, od, S_SWITCH_OUT_MIRROR, 0, "1", "output;", NULL);
>>  }
>>  
>>  static void
>> @@ -6441,7 +6441,7 @@ build_mirror_lflow(struct ovn_port *op,
>>          stage = S_SWITCH_IN_MIRROR;
>>      }
>>  
>> -    ds_put_cstr(&action, "next;");
>> +    ds_put_cstr(&action, egress ? "output;" : "next;");
>>      ds_put_format(&match, "%s == %s && (%s)", dir, op->json_key, 
>> rule->match);
>>      ovn_lflow_add(lflows, op->od, stage, priority, ds_cstr(&match),
>>                    ds_cstr(&action), op->lflow_ref);
>> @@ -6468,7 +6468,8 @@ build_mirror_pass_lflow(struct ovn_port *op,
>>          stage = S_SWITCH_IN_MIRROR;
>>      }
>>  
>> -    ds_put_format(&action, "mirror(%s); next;", serving_port->json_key);
>> +    ds_put_format(&action, "mirror(%s); %s", serving_port->json_key,
>> +                  egress ? "output;" : "next;");
>>      ds_put_format(&match, "%s == %s", dir, op->json_key);
>>      ovn_lflow_add(lflows, op->od, stage, OVN_LPORT_MIRROR_OFFSET,
>>                    ds_cstr(&match), ds_cstr(&action), op->lflow_ref);
>> @@ -6603,7 +6604,7 @@ build_lswitch_port_sec_op(struct ovn_port *op, struct 
>> lflow_table *lflows,
>>          }
>>  
>>          ds_clear(actions);
>> -        ds_put_format(actions, "set_queue(%s); output;", queue_id);
>> +        ds_put_format(actions, "set_queue(%s); next;", queue_id);
>>  
>>          ds_clear(match);
>>          if (lsp_is_localnet(op->nbsp)) {
>> @@ -6884,7 +6885,7 @@ build_lswitch_output_port_sec_od(struct ovn_datapath 
>> *od,
>>                    REGBIT_PORT_SEC_DROP" == 1", debug_drop_action(), 
>> lflow_ref,
>>                    WITH_DESC("Packet does not follow port security rules"));
>>      ovn_lflow_add(lflows, od, S_SWITCH_OUT_APPLY_PORT_SEC, 0,
>> -                  "1", "output;", lflow_ref);
>> +                  "1", "next;", lflow_ref);
>>  }
>>  
>>  static void
>> diff --git a/northd/northd.h b/northd/northd.h
>> index 3d1fd2d31..558bb2571 100644
>> --- a/northd/northd.h
>> +++ b/northd/northd.h
>> @@ -527,9 +527,9 @@ ls_has_localnet_port(const struct ovn_datapath *od)
>>  
>>  /* Logical switch ingress stages. */
>>  #define SWITCH_IN_PIPELINE_STAGES                                           
>>  \
>> -    PIPELINE_STAGE(SWITCH, IN,  CHECK_PORT_SEC, 0, "ls_in_check_port_sec")  
>>  \
>> -    PIPELINE_STAGE(SWITCH, IN,  APPLY_PORT_SEC, 1, "ls_in_apply_port_sec")  
>>  \
>> -    PIPELINE_STAGE(SWITCH, IN,  MIRROR,         2, "ls_in_mirror")        \
>> +    PIPELINE_STAGE(SWITCH, IN,  MIRROR,         0, "ls_in_mirror")          
>>  \
>> +    PIPELINE_STAGE(SWITCH, IN,  CHECK_PORT_SEC, 1, "ls_in_check_port_sec")  
>>  \
>> +    PIPELINE_STAGE(SWITCH, IN,  APPLY_PORT_SEC, 2, "ls_in_apply_port_sec")  
>>  \
>>      PIPELINE_STAGE(SWITCH, IN,  LOOKUP_FDB,     3, "ls_in_lookup_fdb")    \
>>      PIPELINE_STAGE(SWITCH, IN,  PUT_FDB,        4, "ls_in_put_fdb")       \
>>      PIPELINE_STAGE(SWITCH, IN,  PRE_ACL,        5, "ls_in_pre_acl")       \
>> @@ -579,16 +579,15 @@ ls_has_localnet_port(const struct ovn_datapath *od)
>>      PIPELINE_STAGE(SWITCH, OUT, ACL_EVAL,        6, "ls_out_acl_eval")      
>>  \
>>      PIPELINE_STAGE(SWITCH, OUT, ACL_SAMPLE,      7, "ls_out_acl_sample")    
>>  \
>>      PIPELINE_STAGE(SWITCH, OUT, ACL_ACTION,      8, "ls_out_acl_action")    
>>  \
>> -    PIPELINE_STAGE(SWITCH, OUT, MIRROR,          9, "ls_out_mirror")        
>>  \
>> -    PIPELINE_STAGE(SWITCH, OUT, QOS,            10, "ls_out_qos")           
>>  \
>> -    PIPELINE_STAGE(SWITCH, OUT, PRE_NF,         11,                         
>>  \
>> +    PIPELINE_STAGE(SWITCH, OUT, QOS,             9, "ls_out_qos")           
>>  \
>> +    PIPELINE_STAGE(SWITCH, OUT, PRE_NF,         10,                         
>>  \
>>                     "ls_out_pre_network_function")                           
>>  \
>> -    PIPELINE_STAGE(SWITCH, OUT, STATEFUL,       12, "ls_out_stateful")      
>>  \
>> -    PIPELINE_STAGE(SWITCH, OUT, NF,             13,                         
>>  \
>> +    PIPELINE_STAGE(SWITCH, OUT, STATEFUL,       11, "ls_out_stateful")      
>>  \
>> +    PIPELINE_STAGE(SWITCH, OUT, NF,             12,                         
>>  \
>>                     "ls_out_network_function")                               
>>  \
>> -    PIPELINE_STAGE(SWITCH, OUT, CHECK_PORT_SEC, 14, 
>> "ls_out_check_port_sec") \
>> -    PIPELINE_STAGE(SWITCH, OUT, APPLY_PORT_SEC, 15, "ls_out_apply_port_sec")
>> -
>> +    PIPELINE_STAGE(SWITCH, OUT, CHECK_PORT_SEC, 13, 
>> "ls_out_check_port_sec") \
>> +    PIPELINE_STAGE(SWITCH, OUT, APPLY_PORT_SEC, 14, 
>> "ls_out_apply_port_sec") \
>> +    PIPELINE_STAGE(SWITCH, OUT, MIRROR,         15, "ls_out_mirror")        
>>  \

Trailing backslash + removed empty line.

>>  /* Logical router ingress stages. */
>>  #define ROUTER_IN_PIPELINE_STAGES                                         \
>>      PIPELINE_STAGE(ROUTER, IN,  ADMISSION,       0, "lr_in_admission")    \
>> diff --git a/ovn-nb.xml b/ovn-nb.xml
>> index d3f3cc197..d1babbf86 100644
>> --- a/ovn-nb.xml
>> +++ b/ovn-nb.xml
>> @@ -3985,6 +3985,18 @@ or
>>          <code>from-lport</code> mirrors the packets going out of logical 
>> port.
>>          <code>both</code> mirrors for both directions.
>>        </p>
>> +
>> +      <p>
>> +        For mirrors of <var>type</var> <code>lport</code>, mirroring is
>> +        done as close to the interface as possible, so that the mirror
>> +        shows the traffic that is really present on that interface.
>> +        Packets coming into the logical port (<code>to-lport</code>) are
>> +        mirrored in the last egress table, that is, after ACLs, load
>> +        balancing and port security have already been applied.  Packets
>> +        going out of the logical port (<code>from-lport</code>) are
>> +        mirrored the other way around, in the first ingress table, before
>> +        any of those are applied.
>> +      </p>
>>      </column>
>>  
>>      <column name="sink">
>> diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at
>> index 93af177ab..f2d44e294 100644
>> --- a/tests/ovn-northd.at
>> +++ b/tests/ovn-northd.at
>> @@ -10822,7 +10822,7 @@ ovn_strip_lflows ], [0], [dnl
>>    table=??(ls_in_l2_lkup      ), priority=72   , match=(eth.mcast && (nd_na 
>> || nd_rs || nd_ra)), action=(outport = "_MC_flood"; output;)
>>    table=??(ls_in_l2_unknown   ), priority=0    , match=(1), action=(output;)
>>    table=??(ls_in_l2_unknown   ), priority=50   , match=(outport == "none"), 
>> action=(drop;)
>> -  table=??(ls_out_apply_port_sec), priority=0    , match=(1), 
>> action=(output;)
>> +  table=??(ls_out_apply_port_sec), priority=0    , match=(1), action=(next;)
>>    table=??(ls_out_apply_port_sec), priority=50   , match=(reg0[[15]] == 1), 
>> action=(drop;)
>>    table=??(ls_out_check_port_sec), priority=0    , match=(1), 
>> action=(reg0[[15]] = check_out_port_sec(); next;)
>>    table=??(ls_out_check_port_sec), priority=100  , match=(eth.mcast), 
>> action=(reg0[[15]] = 0; next;)
>> @@ -10860,7 +10860,7 @@ ovn_strip_lflows ], [0], [dnl
>>    table=??(ls_in_l2_lkup      ), priority=72   , match=(eth.mcast && (nd_na 
>> || nd_rs || nd_ra)), action=(outport = "_MC_flood"; output;)
>>    table=??(ls_in_l2_unknown   ), priority=0    , match=(1), action=(output;)
>>    table=??(ls_in_l2_unknown   ), priority=50   , match=(outport == "none"), 
>> action=(drop;)
>> -  table=??(ls_out_apply_port_sec), priority=0    , match=(1), 
>> action=(output;)
>> +  table=??(ls_out_apply_port_sec), priority=0    , match=(1), action=(next;)
>>    table=??(ls_out_apply_port_sec), priority=50   , match=(reg0[[15]] == 1), 
>> action=(drop;)
>>    table=??(ls_out_check_port_sec), priority=0    , match=(1), 
>> action=(reg0[[15]] = check_out_port_sec(); next;)
>>    table=??(ls_out_check_port_sec), priority=100  , match=(eth.mcast), 
>> action=(reg0[[15]] = 0; next;)
>> @@ -10897,7 +10897,7 @@ ovn_strip_lflows ], [0], [dnl
>>    table=??(ls_in_l2_lkup      ), priority=72   , match=(eth.mcast && (nd_na 
>> || nd_rs || nd_ra)), action=(outport = "_MC_flood"; output;)
>>    table=??(ls_in_l2_unknown   ), priority=0    , match=(1), action=(output;)
>>    table=??(ls_in_l2_unknown   ), priority=50   , match=(outport == "none"), 
>> action=(drop;)
>> -  table=??(ls_out_apply_port_sec), priority=0    , match=(1), 
>> action=(output;)
>> +  table=??(ls_out_apply_port_sec), priority=0    , match=(1), action=(next;)
>>    table=??(ls_out_apply_port_sec), priority=50   , match=(reg0[[15]] == 1), 
>> action=(drop;)
>>    table=??(ls_out_check_port_sec), priority=0    , match=(1), 
>> action=(reg0[[15]] = check_out_port_sec(); next;)
>>    table=??(ls_out_check_port_sec), priority=100  , match=(eth.mcast), 
>> action=(reg0[[15]] = 0; next;)
>> @@ -10936,7 +10936,7 @@ ovn_strip_lflows ], [0], [dnl
>>    table=??(ls_in_l2_unknown   ), priority=0    , match=(1), action=(output;)
>>    table=??(ls_in_l2_unknown   ), priority=50   , match=(outport == "none"), 
>> action=(drop;)
>>    table=??(ls_in_l2_unknown   ), priority=50   , match=(outport == 
>> "sw0p1"), action=(drop;)
>> -  table=??(ls_out_apply_port_sec), priority=0    , match=(1), 
>> action=(output;)
>> +  table=??(ls_out_apply_port_sec), priority=0    , match=(1), action=(next;)
>>    table=??(ls_out_apply_port_sec), priority=50   , match=(reg0[[15]] == 1), 
>> action=(drop;)
>>    table=??(ls_out_check_port_sec), priority=0    , match=(1), 
>> action=(reg0[[15]] = check_out_port_sec(); next;)
>>    table=??(ls_out_check_port_sec), priority=100  , match=(eth.mcast), 
>> action=(reg0[[15]] = 0; next;)
>> @@ -10974,8 +10974,8 @@ ovn_strip_lflows ], [0], [dnl
>>    table=??(ls_in_l2_unknown   ), priority=0    , match=(1), action=(output;)
>>    table=??(ls_in_l2_unknown   ), priority=50   , match=(outport == "none"), 
>> action=(drop;)
>>    table=??(ls_in_l2_unknown   ), priority=50   , match=(outport == 
>> "sw0p1"), action=(drop;)
>> -  table=??(ls_out_apply_port_sec), priority=0    , match=(1), 
>> action=(output;)
>> -  table=??(ls_out_apply_port_sec), priority=110  , match=(outport == 
>> "localnetport" && inport == "sw0p2"), action=(set_queue(10); output;)
>> +  table=??(ls_out_apply_port_sec), priority=0    , match=(1), action=(next;)
>> +  table=??(ls_out_apply_port_sec), priority=110  , match=(outport == 
>> "localnetport" && inport == "sw0p2"), action=(set_queue(10); next;)
>>    table=??(ls_out_apply_port_sec), priority=50   , match=(reg0[[15]] == 1), 
>> action=(drop;)
>>    table=??(ls_out_check_port_sec), priority=0    , match=(1), 
>> action=(reg0[[15]] = check_out_port_sec(); next;)
>>    table=??(ls_out_check_port_sec), priority=100  , match=(eth.mcast), 
>> action=(reg0[[15]] = 0; next;)
>> @@ -11015,9 +11015,9 @@ ovn_strip_lflows ], [0], [dnl
>>    table=??(ls_in_l2_lkup      ), priority=72   , match=(eth.mcast && (nd_na 
>> || nd_rs || nd_ra)), action=(outport = "_MC_flood"; output;)
>>    table=??(ls_in_l2_unknown   ), priority=0    , match=(1), action=(output;)
>>    table=??(ls_in_l2_unknown   ), priority=50   , match=(outport == "none"), 
>> action=(drop;)
>> -  table=??(ls_out_apply_port_sec), priority=0    , match=(1), 
>> action=(output;)
>> -  table=??(ls_out_apply_port_sec), priority=100  , match=(outport == 
>> "localnetport"), action=(set_queue(10); output;)
>> -  table=??(ls_out_apply_port_sec), priority=110  , match=(outport == 
>> "localnetport" && inport == "sw0p2"), action=(set_queue(10); output;)
>> +  table=??(ls_out_apply_port_sec), priority=0    , match=(1), action=(next;)
>> +  table=??(ls_out_apply_port_sec), priority=100  , match=(outport == 
>> "localnetport"), action=(set_queue(10); next;)
>> +  table=??(ls_out_apply_port_sec), priority=110  , match=(outport == 
>> "localnetport" && inport == "sw0p2"), action=(set_queue(10); next;)
>>    table=??(ls_out_apply_port_sec), priority=50   , match=(reg0[[15]] == 1), 
>> action=(drop;)
>>    table=??(ls_out_check_port_sec), priority=0    , match=(1), 
>> action=(reg0[[15]] = check_out_port_sec(); next;)
>>    table=??(ls_out_check_port_sec), priority=100  , match=(eth.mcast), 
>> action=(reg0[[15]] = 0; next;)
>> @@ -20758,7 +20758,7 @@ ovn-sbctl lflow-list sw0 > lflow-list
>>  
>>  AT_CHECK([grep -e "ls_in_mirror" -e "ls_out_mirror" lflow-list | 
>> ovn_strip_lflows], [0], [dnl
>>    table=??(ls_in_mirror       ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>>  ])
>>  
>>  check ovn-nbctl lsp-attach-mirror sw0-p1 mirror0
>> @@ -20771,8 +20771,8 @@ check_column mirror Port_Binding type 
>> logical_port=mp-sw0-sw0-target0
>>  ovn-sbctl lflow-list sw0 > lflow-list
>>  AT_CHECK([grep -e "ls_in_mirror" -e "ls_out_mirror" lflow-list | 
>> ovn_strip_lflows], [0], [dnl
>>    table=??(ls_in_mirror       ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>> +  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); output;)
>>  ])
>>  
>>  ovn-sbctl lflow-list sw0 > lflow-list
>> @@ -20794,10 +20794,10 @@ AT_CHECK([grep -e "ls_in_mirror" -e 
>> "ls_out_mirror" lflow-list | ovn_strip_lflow
>>    table=??(ls_in_mirror       ), priority=100  , match=(inport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); next;)
>>    table=??(ls_in_mirror       ), priority=200  , match=(inport == "sw0-p1" 
>> && (ip)), action=(mirror("mp-sw0-sw0-target0"); next;)
>>    table=??(ls_in_mirror       ), priority=250  , match=(inport == "sw0-p1" 
>> && (icmp)), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); next;)
>> -  table=??(ls_out_mirror      ), priority=200  , match=(outport == "sw0-p1" 
>> && (ip)), action=(mirror("mp-sw0-sw0-target0"); next;)
>> -  table=??(ls_out_mirror      ), priority=250  , match=(outport == "sw0-p1" 
>> && (icmp)), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>> +  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); output;)
>> +  table=??(ls_out_mirror      ), priority=200  , match=(outport == "sw0-p1" 
>> && (ip)), action=(mirror("mp-sw0-sw0-target0"); output;)
>> +  table=??(ls_out_mirror      ), priority=250  , match=(outport == "sw0-p1" 
>> && (icmp)), action=(output;)
>>  ])
>>  
>>  check ovn-nbctl lsp-attach-mirror sw0-p1 mirror2
>> @@ -20816,10 +20816,10 @@ AT_CHECK([grep -e "ls_in_mirror" -e 
>> "ls_out_mirror" lflow-list | ovn_strip_lflow
>>    table=??(ls_in_mirror       ), priority=200  , match=(inport == "sw0-p1" 
>> && (ip4.dst == 192.168.0.1)), action=(mirror("mp-sw0-sw1-target1"); next;)
>>    table=??(ls_in_mirror       ), priority=250  , match=(inport == "sw0-p1" 
>> && (1)), action=(next;)
>>    table=??(ls_in_mirror       ), priority=250  , match=(inport == "sw0-p1" 
>> && (icmp)), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); next;)
>> -  table=??(ls_out_mirror      ), priority=200  , match=(outport == "sw0-p1" 
>> && (ip)), action=(mirror("mp-sw0-sw0-target0"); next;)
>> -  table=??(ls_out_mirror      ), priority=250  , match=(outport == "sw0-p1" 
>> && (icmp)), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>> +  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); output;)
>> +  table=??(ls_out_mirror      ), priority=200  , match=(outport == "sw0-p1" 
>> && (ip)), action=(mirror("mp-sw0-sw0-target0"); output;)
>> +  table=??(ls_out_mirror      ), priority=250  , match=(outport == "sw0-p1" 
>> && (icmp)), action=(output;)
>>  ])
>>  
>>  ovn-sbctl lflow-list sw0 > lflow-list
>> @@ -20842,7 +20842,7 @@ AT_CHECK([grep -e "ls_in_mirror" -e "ls_out_mirror" 
>> lflow-list | ovn_strip_lflow
>>    table=??(ls_in_mirror       ), priority=100  , match=(inport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw1-target1"); next;)
>>    table=??(ls_in_mirror       ), priority=200  , match=(inport == "sw0-p1" 
>> && (ip4.dst == 192.168.0.1)), action=(mirror("mp-sw0-sw1-target1"); next;)
>>    table=??(ls_in_mirror       ), priority=250  , match=(inport == "sw0-p1" 
>> && (1)), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>>  ])
>>  
>>  AT_CHECK([grep -e "ls_out_pre_acl" lflow-list | ovn_strip_lflows], [0], [dnl
>> @@ -20867,10 +20867,10 @@ AT_CHECK([grep -e "ls_in_mirror" -e 
>> "ls_out_mirror" lflow-list | ovn_strip_lflow
>>    table=??(ls_in_mirror       ), priority=200  , match=(inport == "sw0-p1" 
>> && (ip4.dst == 192.168.0.1)), action=(mirror("mp-sw0-sw1-target1"); next;)
>>    table=??(ls_in_mirror       ), priority=250  , match=(inport == "sw0-p1" 
>> && (1)), action=(next;)
>>    table=??(ls_in_mirror       ), priority=250  , match=(inport == "sw0-p1" 
>> && (icmp)), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); next;)
>> -  table=??(ls_out_mirror      ), priority=200  , match=(outport == "sw0-p1" 
>> && (ip)), action=(mirror("mp-sw0-sw0-target0"); next;)
>> -  table=??(ls_out_mirror      ), priority=250  , match=(outport == "sw0-p1" 
>> && (icmp)), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>> +  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); output;)
>> +  table=??(ls_out_mirror      ), priority=200  , match=(outport == "sw0-p1" 
>> && (ip)), action=(mirror("mp-sw0-sw0-target0"); output;)
>> +  table=??(ls_out_mirror      ), priority=250  , match=(outport == "sw0-p1" 
>> && (icmp)), action=(output;)
>>  ])
>>  
>>  mirror1uuid_uuid=`ovn-nbctl --bare --columns _uuid find Mirror 
>> name="mirror1"`
>> @@ -20887,11 +20887,11 @@ AT_CHECK([grep -e "ls_in_mirror" -e 
>> "ls_out_mirror" lflow-list | ovn_strip_lflow
>>    table=??(ls_in_mirror       ), priority=200  , match=(inport == "sw0-p1" 
>> && (ip4.dst == 192.168.0.1)), action=(mirror("mp-sw0-sw1-target1"); next;)
>>    table=??(ls_in_mirror       ), priority=250  , match=(inport == "sw0-p1" 
>> && (1)), action=(next;)
>>    table=??(ls_in_mirror       ), priority=250  , match=(inport == "sw0-p1" 
>> && (icmp)), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); next;)
>> -  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw1-target1"); next;)
>> -  table=??(ls_out_mirror      ), priority=200  , match=(outport == "sw0-p1" 
>> && (ip)), action=(mirror("mp-sw0-sw1-target1"); next;)
>> -  table=??(ls_out_mirror      ), priority=250  , match=(outport == "sw0-p1" 
>> && (icmp)), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>> +  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw0-target0"); output;)
>> +  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "sw0-p1"), action=(mirror("mp-sw0-sw1-target1"); output;)
>> +  table=??(ls_out_mirror      ), priority=200  , match=(outport == "sw0-p1" 
>> && (ip)), action=(mirror("mp-sw0-sw1-target1"); output;)
>> +  table=??(ls_out_mirror      ), priority=250  , match=(outport == "sw0-p1" 
>> && (icmp)), action=(output;)
>>  ])
>>  
>>  check_row_count Port_Binding 1 logical_port=mp-sw0-sw0-target0
>> @@ -20907,7 +20907,7 @@ check ovn-nbctl --wait=sb sync
>>  ovn-sbctl lflow-list sw0 > lflow-list
>>  AT_CHECK([grep -e "ls_in_mirror" -e "ls_out_mirror" lflow-list | 
>> ovn_strip_lflows], [0], [dnl
>>    table=??(ls_in_mirror       ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>>  ])
>>  
>>  ovn-sbctl lflow-list sw0 > lflow-list
>> diff --git a/tests/ovn-util.at b/tests/ovn-util.at
>> index 315539342..aecf908ef 100644
>> --- a/tests/ovn-util.at
>> +++ b/tests/ovn-util.at
>> @@ -78,7 +78,7 @@ AT_CHECK_UNQUOTED([cat trace | $PYTHON 
>> $top_srcdir/utilities/ovn_detrace.py.in],
>>          resubmit(,??)
>>        * Logical datapaths:
>>        *     "ls" ($dp_uuid) [[egress]]
>> -      * Logical flow: table=$egress_table (ls_out_apply_port_sec), 
>> priority=0, match=(1), actions=(output;)
>> +      * Logical flow: table=$egress_table (ls_out_apply_port_sec), 
>> priority=0, match=(1), actions=(next;)
>>          65. reg15=0x2,metadata=0x1, priority 100, cookie $pb_vm1
>>              output:2
>>            * Logical datapath: "ls" ($dp_uuid)
>> @@ -99,7 +99,7 @@ cookie=$ingress, priority=50,metadata=0x1 
>> actions=load:0->NXM_NX_REG10[[12]],res
>>  cookie=$egress, priority=0,metadata=0x1 actions=resubmit(,??)
>>    * Logical datapaths:
>>    *     "ls" ($dp_uuid) [[egress]]
>> -  * Logical flow: table=$egress_table (ls_out_apply_port_sec), priority=0, 
>> match=(1), actions=(output;)
>> +  * Logical flow: table=$egress_table (ls_out_apply_port_sec), priority=0, 
>> match=(1), actions=(next;)
>>  
>>  ])
>>  
>> diff --git a/tests/ovn.at b/tests/ovn.at
>> index 780149467..061c8797e 100644
>> --- a/tests/ovn.at
>> +++ b/tests/ovn.at
>> @@ -19724,8 +19724,8 @@ check_column "$hv3_uuid" sb:Port_Binding chassis 
>> logical_port=mp-ls1-ls2-lp2
>>  AT_CHECK([ovn-sbctl lflow-list ls1 | grep mirror| ovn_strip_lflows], [0], 
>> [dnl
>>    table=??(ls_in_mirror       ), priority=0    , match=(1), action=(next;)
>>    table=??(ls_in_mirror       ), priority=100  , match=(inport == 
>> "ls1-lp1"), action=(mirror("mp-ls1-ls2-lp2"); next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "ls1-lp1"), action=(mirror("mp-ls1-ls2-lp2"); next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>> +  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "ls1-lp1"), action=(mirror("mp-ls1-ls2-lp2"); output;)
>>  ])
>>  
>>  as hv2 reset_pcap_file hv2-vif1 hv2/vif1
>> @@ -19775,7 +19775,7 @@ check_row_count Port_Binding 0 
>> logical_port=mp-ls1-ls2-lp2
>>  
>>  AT_CHECK([ovn-sbctl lflow-list ls1 | grep mirror| ovn_strip_lflows], [0], 
>> [dnl
>>    table=??(ls_in_mirror       ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>>  ])
>>  
>>  as hv3 reset_pcap_file hv3-vif1 hv3/vif1
>> @@ -19810,9 +19810,9 @@ AT_CHECK([ovn-sbctl lflow-list ls1 | grep mirror | 
>> ovn_strip_lflows], [0], [dnl
>>    table=??(ls_in_mirror       ), priority=0    , match=(1), action=(next;)
>>    table=??(ls_in_mirror       ), priority=100  , match=(inport == 
>> "ls1-lp1"), action=(mirror("mp-ls1-ls2-lp2"); next;)
>>    table=??(ls_in_mirror       ), priority=300  , match=(inport == "ls1-lp1" 
>> && (1)), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "ls1-lp1"), action=(mirror("mp-ls1-ls2-lp2"); next;)
>> -  table=??(ls_out_mirror      ), priority=300  , match=(outport == 
>> "ls1-lp1" && (1)), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>> +  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "ls1-lp1"), action=(mirror("mp-ls1-ls2-lp2"); output;)
>> +  table=??(ls_out_mirror      ), priority=300  , match=(outport == 
>> "ls1-lp1" && (1)), action=(output;)
>>  ])
>>  
>>  AT_CHECK([ovn-sbctl lflow-list ls1 | grep ls_out_pre_acl | 
>> ovn_strip_lflows], [0], [dnl
>> @@ -19825,7 +19825,7 @@ AT_CHECK([ovn-sbctl lflow-list ls1 | grep 
>> ls_out_pre_acl | ovn_strip_lflows], [0
>>  check ovn-nbctl --wait=sb lsp-del ls2-lp2
>>  AT_CHECK([ovn-sbctl lflow-list ls1 | grep mirror | ovn_strip_lflows], [0], 
>> [dnl
>>    table=??(ls_in_mirror       ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>>  ])
>>  
>>  check ovn-nbctl lsp-add ls2 ls2-lp2
>> @@ -19848,10 +19848,10 @@ AT_CHECK([ovn-sbctl lflow-list ls1 | grep mirror| 
>> ovn_strip_lflows], [0], [dnl
>>    table=??(ls_in_mirror       ), priority=100  , match=(inport == 
>> "ls1-lp1"), action=(mirror("mp-ls1-ls2-lp2"); next;)
>>    table=??(ls_in_mirror       ), priority=300  , match=(inport == "ls1-lp1" 
>> && (1)), action=(next;)
>>    table=??(ls_in_mirror       ), priority=400  , match=(inport == "ls1-lp1" 
>> && (udp.dst == 4369)), action=(mirror("mp-ls1-ls2-lp2"); next;)
>> -  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "ls1-lp1"), action=(mirror("mp-ls1-ls2-lp2"); next;)
>> -  table=??(ls_out_mirror      ), priority=300  , match=(outport == 
>> "ls1-lp1" && (1)), action=(next;)
>> -  table=??(ls_out_mirror      ), priority=400  , match=(outport == 
>> "ls1-lp1" && (udp.dst == 4369)), action=(mirror("mp-ls1-ls2-lp2"); next;)
>> +  table=??(ls_out_mirror      ), priority=0    , match=(1), action=(output;)
>> +  table=??(ls_out_mirror      ), priority=100  , match=(outport == 
>> "ls1-lp1"), action=(mirror("mp-ls1-ls2-lp2"); output;)
>> +  table=??(ls_out_mirror      ), priority=300  , match=(outport == 
>> "ls1-lp1" && (1)), action=(output;)
>> +  table=??(ls_out_mirror      ), priority=400  , match=(outport == 
>> "ls1-lp1" && (udp.dst == 4369)), action=(mirror("mp-ls1-ls2-lp2"); output;)
>>  ])
>>  
>>  AT_CHECK([ovn-sbctl lflow-list ls1 | grep ls_out_pre_acl | 
>> ovn_strip_lflows], [0], [dnl
> 

_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev

Reply via email to