Hi Ben, This is the configuration -
ovs-vsctl -- --id=@p get port vxlan0 -- [email protected] get Port eth0.128 -- [email protected] get Port eth0.129 -- --id=@m create Mirror name=mirror1 [email protected],@p [email protected] -- set Bridge br0 mirrors=@m Thanks Namrata -----Original Message----- From: Ben Pfaff [mailto:[email protected]] Sent: Tuesday, August 21, 2018 11:15 AM To: Limaye, Namrata <[email protected]> Cc: [email protected]; [email protected]; Saha, Gargi <[email protected]>; Choi, James <[email protected]> Subject: Re: [ovs-dev] RX Mirroing issue with Decap in vxlan case On Fri, Aug 17, 2018 at 06:55:39PM +0000, Limaye, Namrata wrote: > > Hi, > > I am facing an issue with Decap in RX Mirroring case (select_src_port) > for Vxlan. With the following config – > > ovs-vsctl -- --id=@p get port vxlan0 -- [email protected]<mailto:[email protected]> > get Port eth0.128 -- [email protected]<mailto:[email protected]> get Port eth0.129 > -- --id=@m create Mirror name=mirror1 > [email protected],@p<mailto:[email protected],@p> > [email protected]<mailto:[email protected]> -- set Bridge br0 > mirrors=@m”. > > The order of action and ports is wrong. This is the order – > > > 1. Release action > > 2. Mirror port (Non vxlan) > > 3. Output port (VXlan) > > For actions to be applied in the right order – the order should be – > > 1. Mirror port (non vxlan) > > 2. Release action > > 3. Output port (VXlan) What's a release action? Can you provide your configuration without corrupting it with <mailto:...>? Thanks, Ben. _______________________________________________ dev mailing list [email protected] https://mail.openvswitch.org/mailman/listinfo/ovs-dev
