Hi, Here are my takes on installing OWFS in Kamikaze big enadian: it
installed OK with all libraries for MIPS (big endian), and file system looks
alright. But while running OWFS, I\'ve a few problems. 1. I
tried \"owfs -d /dev/ttyS0 /mnt/1wire\". It fails with \"DEFAULT: Cannot detect
DS9097 (passive) interface on /dev/ttyS0\". This is probably because, OWFS can
not read the Maxim DS2781K chip that we are using for voltage sensing.
Maxim chip pin out: DQ: Data i/o,
PIO: Programmable i/o,
P-: GND, &nb
sp;
B+/B-: Battery sensing. Our Meraki mini serial interface is a J1 4-pin
with: Vcc, Tx, Rx, and GND. Do you have any suggestion? Other
things to report:2. When I tried \"run-owfs\", it gives me error in the script
file: owserver. This is because, owserver has \"nvram\" commmand to check if
the router is an ASUS router with its boardtypes, etc. But Kamikaze 7.07
doesn\'t support nvram anymore. So, this is not working with our Meraki Mini
AP. 3. The serial device is supposed to be in \"/dev/ttyS0\" in our setting, so
did some modification in the script. Thanks.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
