I'm working with a company on an embedded device that will include an
RJ45 jack to interface to 1-Wire sensors. I'm wondering just how
much of a standard 1WRJ45 became after it was proposed. Who
manufactures the majority of 1-Wire sensor assemblies, and what
pinouts have they followed?
At the moment, we're planning to follow the Dallas RJ11/RJ12
standard, but just use the RJ45 jack on our board with the outer two
pins unconnected. (We're using RJ45 instead of RJ11 because the
board can be configured with a serial port or 1-Wire on the RJ45 jack).
-Tom
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Register now and save $200. Hurry, offer ends at 11:59 p.m.,
Monday, April 7! Use priority code J8TLD2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
