Yes, the values work fine, MS-TL light-level in percent is as far as I understood VAD/VDD which looks reasonable. I was just curious about this 10.23 reading. But this is the same with 1wireviewer, so I expect this to be "by design"
Michael -----Original Message----- From: Paul Alfille [mailto:paul.alfi...@gmail.com] Sent: Friday, April 24, 2009 2:52 PM To: owfs-developers@lists.sourceforge.net Subject: Re: [Owfs-developers] iButton Multisensor detection Michael, Thank you for the report asnd for testing to promptly! Do intermediate values work? Paul Alfille On Fri, Apr 24, 2009 at 8:20 AM, Michael Markstaller <m...@elabnet.de> wrote: Paul, thanks, works fine now. Yes, I can confirm: 0x1A MS-TV 0x1B MS-TL 0x1C MS-TC 0x19 MS-TH Just as a note, while playing around with these, I found the following: MS-TL: If the light-level is zero, VAD reads sometimes 0, sometimes 10.23. Don't know wether this is something with the sensor or even specific for the DS2438, the same with the MS-TV, also reads 10.23 when it should be 0. Looks to me for any application using the values everything above 10 should most likely be interpreted as zero or below.. Michael -----Original Message----- From: Paul Alfille [mailto:paul.alfi...@gmail.com] Sent: Friday, April 24, 2009 1:02 AM To: owfs-developers@lists.sourceforge.net Subject: Re: [Owfs-developers] iButton Multisensor detection Ok, I made the change. Can you confirm: 0x1A MS-TV 0x1B MS-TL 0x19 MS-TH Paul On Thu, Apr 23, 2009 at 1:35 PM, Michael Markstaller <m...@elabnet.de> wrote: I also found no docs on this, I simply looked at ow_2438.c and found the according values at page.3 At least for the recently bought MS-TH, MS-TL, and MS-TV I have here, they match. Don't know if this has changed.. Michael -----Original Message----- From: Paul Alfille [mailto:paul.alfi...@gmail.com] Sent: Thursday, April 23, 2009 6:49 PM To: owfs-developers@lists.sourceforge.net Subject: Re: [Owfs-developers] iButton Multisensor detection Hmm... We were looking at page 0 in the code. I've just perused iButtonLink's website and can't find the location documented. If it's supposed to be page 3, it's an easy fix. Paul On Thu, Apr 23, 2009 at 9:32 AM, Michael Markstaller <m...@elabnet.de> wrote: Hi, I wonder wether I'm doing something wrong or or there might be a problem with the detection/display of the iButtonlink Multisensors within owfs: Doing a "owread /26.123456000000/MultiSensor/type" I only get "unknown", although the sensor (a MS-TL) has the value "1B00000000000000" in page.3 (which I guess is where to look for the type) owfs is 2.7p21, pulled from svn today. Regards Michael ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensign option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
