Hi folks, It works!!!! :-)
For the first try. (with --8bit) I have only one short question: - If there are more than one 1wire devices on one bus, how will they appear in the mounted filesystem? actually it looks: /3B.CA8505000000 (addressed #0) does the addressed #1 will look like this? : /3B.CA8505000001 ??? only the type DS1825 will be used on the same bus. thanks kako k...@zhnet.hu írta: > Thanks. I'll be back when I built the host adapter and tried it all. > > bye > kako > > > > >> OWFS sets the baud rate. The BAUD rate actually changes between the >> data and reset signals. >> >> It uses 6-bit bytes, preferentially, unless your UART cannot generate >> them, in which case the --8bit setting can be used. >> >> Paul Alfille >> >> > > > ------------------------------------------------------------------------------ > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, find bugs > proactively, and fine-tune applications for parallel performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
