On Wed, 2011-03-02 at 09:18 -0600, Guil Barros wrote:
> > Hhmmm. Interesting. Tips like these is exactly what I am after, so thanks a
> > bunch for that.
> >
> > I like the idea of covering the sensor (or parts of the sensor and the PCB)
> > with silicone. Do you remember what specific product you used (was it a
> > spray, or just one of those tubes you buy at HomeDepot or Lowe's that you
> > apply with a gun)?
> 
> Yes, I just got a tube of silicone I had laying around the house and
> encased the whole thing in it. If I remember the tech sheet correctly,
> the newer DS18b20's are entirely waterproof (old ones had issues) so
> you really only need to encase the leads. I did the whole thing as the
> sensor is pulling the temp read off of the ground wire anyways so
> might as well be safe.
> 
I have several sensors out on the roof monitoring solar panels. I use 3
core 0.75mm high temperature cable, solder the DS18S20 to the end with
small heat shrink sleeves over the pins, then use another heat shrink
over the top and onto the outer of the cable, but filled it with epoxy
resin, squeeze the air out, refill, etc, then when I thought all the air
bubbles were out used a paint strip gun to shrink the sleeve.  It is
slow and very messy but I think I have got weather proof sensors as a
result.


> > I also like the idea of using wax. I obviously had not thought about it. I
> > suppose that in that case you melt the wax (like from a candle) in a pot and
> > then dip the PCB into it. Is that they way people would do it?
> 
> I've seen it done for potting electronics on ROV's. In that case they
> had the electronics in a small plastic enclosure and just filled the
> enclosure with wax when done.
> 
> > I also found about "conformal coating" while doing some searches last night.
> > Guess that is the official name of what I am after. There are products to do
> > conformal coating, although nothing you can find at your local hardware
> > store, which is why I'd prefer to go with one of the two methods you
> > mentioned.
> 
> I think thats what Hobby-Boards uses, might be worth sending them an email.
> 
> --------------------


------------------------------------------------------------------------------
Free Software Download: Index, Search & Analyze Logs and other IT data in 
Real-Time with Splunk. Collect, index and harness all the fast moving IT data 
generated by your applications, servers and devices whether physical, virtual
or in the cloud. Deliver compliance at lower cost and gain new business 
insights. http://p.sf.net/sfu/splunk-dev2dev 
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to