"That's slick, but copper in aquariums is a big no-no.  High-end freshwater
or saltwater reef aquarium inhabitants like corals and invertebrates can not
tolerate copper. "

True, true.  then bic biro tube cut into 3 parts would be a good replacement
for the copper. :)

On Wed, Mar 2, 2011 at 10:18 PM, Scott <[email protected]> wrote:

>  That's slick, but copper in aquariums is a big no-no.  High-end freshwater
> or saltwater reef aquarium inhabitants like corals and invertebrates can not
> tolerate copper.
>
> I encased my sensors in epoxy to avoid water contact.  Just solder up the
> sensor, mix up some 2-part epoxy, and smear it over the chip and any wire
> that will be in the water.  I put on 2 "coats" just to sure it's water
> proof.  I've found it works well for sensing temperature - they aren't
> pretty, but they track temps just fine.
>
> http://bytality.com/gallery/1-wire_setup/
>
> As far as 85°C, my temp collection script takes a series of readings and
> then tosses any that are outside a predefined distance from the average.
> Granted, my aquarium should never hit anywhere near 85°C, but it got rid of
> my errant readings.
>
> -Scott
>
>
>
> On 3/2/2011 4:04 PM, nick wrote:
>
> Here are my water proof sensors using copper pipe and HMA, they have worked
> well so far.
>
> http://kiwi-hacker.blogspot.com/2011/01/new-soil-temperature-sensors.html
>
>
>
> On Wed, Mar 2, 2011 at 9:57 PM, Mick Sulley <[email protected]> wrote:
>
>> On Wed, 2011-03-02 at 09:18 -0600, Guil Barros wrote:
>> > > Hhmmm. Interesting. Tips like these is exactly what I am after, so
>> thanks a
>> > > bunch for that.
>> > >
>> > > I like the idea of covering the sensor (or parts of the sensor and the
>> PCB)
>> > > with silicone. Do you remember what specific product you used (was it
>> a
>> > > spray, or just one of those tubes you buy at HomeDepot or Lowe's that
>> you
>> > > apply with a gun)?
>> >
>> > Yes, I just got a tube of silicone I had laying around the house and
>> > encased the whole thing in it. If I remember the tech sheet correctly,
>> > the newer DS18b20's are entirely waterproof (old ones had issues) so
>> > you really only need to encase the leads. I did the whole thing as the
>> > sensor is pulling the temp read off of the ground wire anyways so
>> > might as well be safe.
>> >
>>  I have several sensors out on the roof monitoring solar panels. I use 3
>> core 0.75mm high temperature cable, solder the DS18S20 to the end with
>> small heat shrink sleeves over the pins, then use another heat shrink
>> over the top and onto the outer of the cable, but filled it with epoxy
>> resin, squeeze the air out, refill, etc, then when I thought all the air
>> bubbles were out used a paint strip gun to shrink the sleeve.  It is
>> slow and very messy but I think I have got weather proof sensors as a
>> result.
>>
>>
>> > > I also like the idea of using wax. I obviously had not thought about
>> it. I
>> > > suppose that in that case you melt the wax (like from a candle) in a
>> pot and
>> > > then dip the PCB into it. Is that they way people would do it?
>> >
>> > I've seen it done for potting electronics on ROV's. In that case they
>> > had the electronics in a small plastic enclosure and just filled the
>> > enclosure with wax when done.
>> >
>> > > I also found about "conformal coating" while doing some searches last
>> night.
>> > > Guess that is the official name of what I am after. There are products
>> to do
>> > > conformal coating, although nothing you can find at your local
>> hardware
>> > > store, which is why I'd prefer to go with one of the two methods you
>> > > mentioned.
>> >
>> > I think thats what Hobby-Boards uses, might be worth sending them an
>> email.
>> >
>> > --------------------
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Free Software Download: Index, Search & Analyze Logs and other IT data in
>> Real-Time with Splunk. Collect, index and harness all the fast moving IT
>> data
>> generated by your applications, servers and devices whether physical,
>> virtual
>> or in the cloud. Deliver compliance at lower cost and gain new business
>> insights. http://p.sf.net/sfu/splunk-dev2dev
>> _______________________________________________
>> Owfs-developers mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>>
>
>
> ------------------------------------------------------------------------------
> Free Software Download: Index, Search & Analyze Logs and other IT data in
> Real-Time with Splunk. Collect, index and harness all the fast moving IT data
> generated by your applications, servers and devices whether physical, virtual
> or in the cloud. Deliver compliance at lower cost and gain new business
> insights. http://p.sf.net/sfu/splunk-dev2dev
>
>
> _______________________________________________
> Owfs-developers mailing 
> [email protected]https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
>
>
>
> ------------------------------------------------------------------------------
> Free Software Download: Index, Search & Analyze Logs and other IT data in
> Real-Time with Splunk. Collect, index and harness all the fast moving IT
> data
> generated by your applications, servers and devices whether physical,
> virtual
> or in the cloud. Deliver compliance at lower cost and gain new business
> insights. http://p.sf.net/sfu/splunk-dev2dev
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
>
------------------------------------------------------------------------------
Free Software Download: Index, Search & Analyze Logs and other IT data in 
Real-Time with Splunk. Collect, index and harness all the fast moving IT data 
generated by your applications, servers and devices whether physical, virtual
or in the cloud. Deliver compliance at lower cost and gain new business 
insights. http://p.sf.net/sfu/splunk-dev2dev 
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to