Hi guys!
Just now I wanted to upgrade from an old version 2.7p31 to a fresh
version 2.8p8.
And that wasn't working in my environment:
DS9097 serial passive adapter and DS1825 sensors. Downgraded, and
working again. Upgraded again to 2.8p8 and was running with debug. It
was outputted this:
----------------
root@pc:/usr/src/owfs-2.8p8/module/owfs/src/c# ./owfs --8bit /dev/ttyS0
/mnt/1wire/ --debug
CONNECT: owfs.c:main(123) fuse mount point: /mnt/1wire/
CONNECT: ow_avahi_link.c:OW_Load_avahi_library(72) No Avahi support.
Library libavahi-client couldn't be loaded
CONNECT: ow_dnssd.c:OW_Load_dnssd_library(136) Zeroconf/Bonjour is
disabled since dnssd library isn't found
CALL: ow_parsename.c:FS_ParsedName_anywhere(95) path=[]
DEBUG: owlib.c:SetupTemperatureLimits(79) Globals temp limits 0C 100C
(for simulated adapters)
DEBUG: ow_ds9097U.c:DS2480_initialize_repeatedly(265) Attempt #0 to
initialize the DS9097U
DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(354) Send the initial
reset to the bus master.
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt
at resetting baud rate of bus master /dev/ttyS0
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second
attempt at resetting baud rate of bus master /dev/ttyS0
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt
at resetting baud rate of bus master /dev/ttyS0
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second
attempt at resetting baud rate of bus master /dev/ttyS0
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_write(416) wrong response
(05 not 44)
DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(354) Send the initial
reset to the bus master.
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt
at resetting baud rate of bus master /dev/ttyS0
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second
attempt at resetting baud rate of bus master /dev/ttyS0
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt
at resetting baud rate of bus master /dev/ttyS0
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second
attempt at resetting baud rate of bus master /dev/ttyS0
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
DEBUG: ow_ds9097U.c:DS2480_configuration_write(416) wrong response
(05 not 44)
----------------
And waits forever...
thanks
bye
kako
------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve
application availability and disaster protection. Learn more about boosting
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
