did you get my segment fault with some near information?

2011/4/17 Paul Alfille <paul.alfi...@gmail.com>:
> Bug, sigh.
>
> Thanks for the report.
>
> Paul
>
> On Sat, Apr 16, 2011 at 12:34 PM, Kassai Istvan <k...@zhnet.hu> wrote:
>> Hi guys!
>>
>> Just now I wanted to upgrade from an old version 2.7p31 to a fresh
>> version 2.8p8.
>> And that wasn't working in my environment:
>> DS9097 serial passive adapter and DS1825 sensors. Downgraded, and
>> working again. Upgraded again to 2.8p8 and was running with debug. It
>> was outputted this:
>>
>>
>> ----------------
>>
>> root@pc:/usr/src/owfs-2.8p8/module/owfs/src/c# ./owfs --8bit /dev/ttyS0
>> /mnt/1wire/ --debug
>> CONNECT: owfs.c:main(123) fuse mount point: /mnt/1wire/
>> CONNECT: ow_avahi_link.c:OW_Load_avahi_library(72) No Avahi support.
>> Library libavahi-client couldn't be loaded
>> CONNECT: ow_dnssd.c:OW_Load_dnssd_library(136) Zeroconf/Bonjour is
>> disabled since dnssd library isn't found
>>    CALL: ow_parsename.c:FS_ParsedName_anywhere(95) path=[]
>>   DEBUG: owlib.c:SetupTemperatureLimits(79) Globals temp limits 0C 100C
>> (for simulated adapters)
>>   DEBUG: ow_ds9097U.c:DS2480_initialize_repeatedly(265) Attempt #0 to
>> initialize the DS9097U
>>   DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(354) Send the initial
>> reset to the bus master.
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
>> not 00)
>>   DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt
>> at resetting baud rate of bus master /dev/ttyS0
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
>> not 00)
>>   DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second
>> attempt at resetting baud rate of bus master /dev/ttyS0
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
>> not 00)
>>   DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt
>> at resetting baud rate of bus master /dev/ttyS0
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
>> not 00)
>>   DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second
>> attempt at resetting baud rate of bus master /dev/ttyS0
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_write(416) wrong response
>> (05 not 44)
>>   DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(354) Send the initial
>> reset to the bus master.
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
>> not 00)
>>   DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt
>> at resetting baud rate of bus master /dev/ttyS0
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
>> not 00)
>>   DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second
>> attempt at resetting baud rate of bus master /dev/ttyS0
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
>> not 00)
>>   DEBUG: ow_ds9097U.c:DS2480_set_baud_control(447) Failed first attempt
>> at resetting baud rate of bus master /dev/ttyS0
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_read(432) wrong response (0F
>> not 00)
>>   DEBUG: ow_ds9097U.c:DS2480_set_baud_control(452) Failed second
>> attempt at resetting baud rate of bus master /dev/ttyS0
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_tcp_read.c:tcp_read(64) attempt 1 bytes Time: 5.000000 seconds
>>   DEBUG: ow_tcp_read.c:tcp_read(114) read: 1 - 0 = 1
>>   DEBUG: ow_ds9097U.c:DS2480_configuration_write(416) wrong response
>> (05 not 44)
>>
>> ----------------
>>
>>
>> And waits forever...
>>
>> thanks
>> bye
>> kako
>>
>> ------------------------------------------------------------------------------
>> Benefiting from Server Virtualization: Beyond Initial Workload
>> Consolidation -- Increasing the use of server virtualization is a top
>> priority.Virtualization can reduce costs, simplify management, and improve
>> application availability and disaster protection. Learn more about boosting
>> the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
>> _______________________________________________
>> Owfs-developers mailing list
>> Owfs-developers@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>>
>
> ------------------------------------------------------------------------------
> Benefiting from Server Virtualization: Beyond Initial Workload
> Consolidation -- Increasing the use of server virtualization is a top
> priority.Virtualization can reduce costs, simplify management, and improve
> application availability and disaster protection. Learn more about boosting
> the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
> _______________________________________________
> Owfs-developers mailing list
> Owfs-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
>



-- 
Roberto Spadim
Spadim Technology / SPAEmpresarial

------------------------------------------------------------------------------
Benefiting from Server Virtualization: Beyond Initial Workload 
Consolidation -- Increasing the use of server virtualization is a top
priority.Virtualization can reduce costs, simplify management, and improve 
application availability and disaster protection. Learn more about boosting 
the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to