Paul Alfille <[email protected]> writes: > Just a thought -- are your hubs powered? I wonder if bus power is being > overextended. Is there any information in dmesg?
Not powered, as I don't expect DS9490R to draw much power, but you have a point and I can try to power them if I cascade again. There was no hint of anything wrong in dmesg. All DS9040R were detected and enumerated, and didn't drop out. As for the owserver stability issue, I suspect that it's the same as I've experienced before - sensors disappearing and eventually owserver dies. I think it happens in all versions, but given a magic combination of owfs version, number of owserver instances, sensors and reading frequency, it will work. This time I didn't see sensor fallouts before owserver died, but the reason why I saw these sensor dropouts earlier could be related my previous use of 1-wire hubs. It was 2.7p38 that crashed. I'm running 2.8p13 now with error_level 9. It's run for 6 hours now, still good. -- Steinar ------------------------------------------------------------------------------ Get a FREE DOWNLOAD! and learn more about uberSVN rich system, user administration capabilities and model configuration. Take the hassle out of deploying and managing Subversion and the tools developers use with it. http://p.sf.net/sfu/wandisco-dev2dev _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
