Hello p4tryk,
Sorry to hear you are having DS2483 problems.
You say you connected SLPZ connected to 5V, this is wrong, SLPZ should be
connected to 3v3, and Vcc connected to 5v as you wrote in you previous post.
I am having similar problems with the bus though they are cured by invoking
the owserver command a second time. I have not measured any voltages but I
see no devices on the bus until I do this.
The other problem I get is that when I use the alias file then the device
values do not appear reliably. I only see the device names. This problem
exists if I use a USB serial device or an I2C device. I have no similar
problems on my other arm system (OpenRD) although it uses an older version
of of owfs.
hth David.
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
