Hi I have only used two x DS2482-100 and they are great -----Original Message----- From: p4trykx [mailto:p4tr...@gmail.com] Sent: Sunday, 21 October 2012 11:38 PM To: OWFS (One-wire file system) discussion and help Subject: [Owfs-developers] DS2483 and raspberry
Hello I was asking before about DS2483 but I'm not clear if anyone got it working. I connected DS2483 to Raspberry Pi i2c bus. I mount it like this sudo /opt/owfs/bin/owfs --i2c=/dev/i2c-0:ALL /mnt/owfs/ and as previously I can't see anything connected to the bus. The problem is that voltage on 1-wire drops to 0v. If I disconnect DS2483 for a moment after starting owfs everything is fine. So I suspect that there is some problem in initialization of this chip which causes it do pull down 1-wire bus. Anyone have similar results? I have the SLPZ connected directly to 3.3V. -- p4trykx ---------------------------------------------------------------------------- -- Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
