Hello DavidThank you for your feedback. Yes I've tried to change the contrast. No real effect.I obtain once some strange characters at the right side of the LCD.I don't have other LCD, But I've order one Arduino Kit + LCD. Hope to receive it soon. However, I don't know if this is directly compatible.Can I use this with any LCD ? Are the pin settings of any LCD 2*16, 2*24 etc... always the same locations ?The LCD I have is the one provided by Louis. I just plug it in the 1-Wire LCD board such as indicated in the photo. I check in the manual too.
I don't have Luis LCD but I think it should be the standard. I myself have HD44780 with hobby boards design.
You don't even have to have Arduino to test it. Few switches should be enough.
http://www.youtube.com/watch?v=ae0shc6fhAM
You just set the bits on dip switch and press "enter" (Clock input)
I think that the smaller ones have the same pinout and the larger over 4x40 have one additional line to select the part of the display because it basically comprises of two displays. You should be able to find some markings on the display and gooogle the datasheet.
Also the backlight pins can be on left or right.
--
p4trykx
------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_jan
_______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
