I am not quite sure what you mean. I have only worked with an usb master and temperature sensors as it is the only one I have access to. The 'C', 'F', 'K', and 'R' is set by the flags although, like the pressure scales, I have not defined those values in the unit, but that is easily done if needed.
I sure hope that others with specific needs will try out the client and contribute to the development. As far as I understand the connection to owserver should to a high degree be agnostic about the 1-wire masters connectionmethods. But I may be wrong :-o -- Med venlig Hilsen Hans Erik Busk On 07-04-2013 20:43, Roberto Spadim wrote: > You can set some owserver parameters, its works like setting a gpio > device pin, try the directories from owserver that set whats the > temperature unit for example, try to write 'C' or 'F' to it, if it > works, you can set gpio devices too ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
