Do you mean setting parameters in the owserver or in the individual sensors? I am using an array of DS18B20, and I have now refreshed my memory about these devices :-) They have a couple of registers where a lower and upper alarmvalue can be set. I hve never seen a real advantage in doing that, as you have to acces the device anyhow to get the information. But another parameter to set is the conversion resolution, which at power up is set to 12 bits, but can be reduced to 11, 10 or 9 bits. I will experiment at little with this in the coming week.
But they have no setting to alter the readout scale to F, that is selected by the flag in the call to owserver. -- Med venlig Hilsen Hans Erik Busk On 07-04-2013 20:43, Roberto Spadim wrote: > You can set some owserver parameters, its works like setting a gpio > device pin, try the directories from owserver that set whats the > temperature unit for example, try to write 'C' or 'F' to it, if it > works, you can set gpio devices too ------------------------------------------------------------------------------ Minimize network downtime and maximize team effectiveness. Reduce network management and security costs.Learn how to hire the most talented Cisco Certified professionals. Visit the Employer Resources Portal http://www.cisco.com/web/learning/employer_resources/index.html _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
