see my sollution at the bottom of the page. http://fstab.nl/en/parts
My experience is that water always finds a way along the wire. With a u
shap tube and the tube watertight at the bottom it will eliminate that.
Nico
Håkan Elmqvist wrote:
I have for some years monitored sea water temperature with DS1820s and
OWFS.
I have soldered the sensors to a twisted pair telephone wire and put
them into a short piece, ca 50 mm, of 12 mm of copper tubing. The
tubes have a 3 mm hole in the middle where I have injected normal RTV
one component acetoxy-polymerising silicone. After that I have let the
silicone skin to polymerise in air for a couple of days and then put
them into the sea.
The disadvantage of this seems to be the lifetime of the sensors,
which seems to be around a year and a half.
Now I have lost my third sensor (I have not done any post mortem) and
would like a better method to protect the DS1820. The method must
withstand ice.
Any tip is appreciated.
Håkan
------------------------------------------------------------------------------
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------------
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
