I have very little Arduino experience, but I was under the impression that
the serial console over the FTDI was typically just used for debug.
On Tue, Feb 11, 2014 at 11:54 AM, Eloy Paris <pe...@chapus.net> wrote:
> Hi Colin,
>
> On 02/11/2014 02:47 PM, Colin Reese wrote:
>
> > I believe the USB is really just a combination of the FTDI/USB adapter
> > and the Moteino. The FTDI bridge is for programming, not for runtime. As
> > far as I know, that is.
>
> The FTDI bridge is used for both programming and runtime serial port. It
> should be just like an Arduino on that regard.
>
> Cheers,
>
> Eloy Paris.-
>
> >
> > On Tue, Feb 11, 2014 at 11:39 AM, Eloy Paris <pe...@chapus.net
> > <mailto:pe...@chapus.net>> wrote:
> >
> > On 02/11/2014 02:29 PM, Colin Reese wrote:
> >
> > > That sounds right. My complaint was that I have all my SPI on the
> Pi
> > > occupied, although in a pinch I could use another GPIO as an
> > additional
> > > chip select.
> > >
> > > So what I have:
> > >
> > > Sensor(s) <-- (I2C, GPIO, etc) --> uC (ATMega) <-- SPI --> RFM
> > <-- 433
> > > --> RFM <-- SPI --> uC (ATMega) <-- UART --> Pi
> >
> > Oh, I see. On the RPi side, you don't have to talk to the RFM12B
> > directly from the RPi using SPI -- you can use serial to talk to the
> uC,
> > or you can get (or build) a device that has an USB port, and then
> > connect the device (the gateway to 433 MHz) to the RPi using USB and
> > talk to it through some serial communication protocol that you come
> > up with.
> >
> > Felix apparently has the Moteino-USB, which comes with an USB
> interface.
> >
> > Cheers,
> >
> > Eloy Paris.-
> >
> > >
> > > I'll start off with the bitbanging and see if I can't find a way
> > to get
> > > a DS2483 and the AVR talking.
> > >
> > >
> > > On Tue, Feb 11, 2014 at 11:15 AM, Eloy Paris <pe...@chapus.net
> > <mailto:pe...@chapus.net>
> > > <mailto:pe...@chapus.net <mailto:pe...@chapus.net>>> wrote:
> > >
> > > On 02/11/2014 02:10 PM, Colin Reese wrote:
> > >
> > > > Yes, but I don't have to talk to the RFM. I can talk to
> > the ATMega.
> > >
> > > I am not following; what do you mean by "I don't have to talk
> > to the
> > > RFM"? If you want to send data wirelessly then someone has to
> > talk to
> > > the RFM. That'd be the microcontroller. So you (the RPi)
> > talks to the uC
> > > and the uC talks to the RFM. On the other side (remote sensor
> > side) the
> > > uC only talks to the RFM.
> > >
> > > I guess I'm missing something...
> > >
> > > Cheers,
> > >
> > > Eloy Paris.-
> > >
> >
> >
> >
> ------------------------------------------------------------------------------
> > Android apps run on BlackBerry 10
> > Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
> > Now with support for Jelly Bean, Bluetooth, Mapview and more.
> > Get your Android app in front of a whole new audience. Start now.
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
> > _______________________________________________
> > Owfs-developers mailing list
> > Owfs-developers@lists.sourceforge.net
> > <mailto:Owfs-developers@lists.sourceforge.net>
> > https://lists.sourceforge.net/lists/listinfo/owfs-developers
> >
> >
> >
> >
> >
> ------------------------------------------------------------------------------
> > Android apps run on BlackBerry 10
> > Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
> > Now with support for Jelly Bean, Bluetooth, Mapview and more.
> > Get your Android app in front of a whole new audience. Start now.
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
> >
> >
> >
> > _______________________________________________
> > Owfs-developers mailing list
> > Owfs-developers@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/owfs-developers
> >
>
>
>
> ------------------------------------------------------------------------------
> Android apps run on BlackBerry 10
> Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
> Now with support for Jelly Bean, Bluetooth, Mapview and more.
> Get your Android app in front of a whole new audience. Start now.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
> _______________________________________________
> Owfs-developers mailing list
> Owfs-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
------------------------------------------------------------------------------
Android apps run on BlackBerry 10
Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
Now with support for Jelly Bean, Bluetooth, Mapview and more.
Get your Android app in front of a whole new audience. Start now.
http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
