On Wed, Sep 24, 2014 at 04:09:23PM +0200, Ekkehard Pofahl wrote: > 2014-09-24 12:29 GMT+02:00 Colin Law <clan...@gmail.com>: > > > unplug a linkUSB and plug it straight back in then it may change > > > Agreed. But plugging and unplugging is usually not done on a "production" > system. After reboot you should see the same configuration every time ?
There's no guarentee, USB inherently dynamic bus. Using persistent device names (/dev/serial/by-id/ etc.) is the only sane way. -- Tomasz Torcz ,,If you try to upissue this patchset I shall be seeking xmpp: zdzich...@chrome.pl an IP-routable hand grenade.'' -- Andrew Morton (LKML) ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
