On 24 September 2014 15:21, Tomasz Torcz <to...@pipebreaker.pl> wrote: > On Wed, Sep 24, 2014 at 04:09:23PM +0200, Ekkehard Pofahl wrote: >> 2014-09-24 12:29 GMT+02:00 Colin Law <clan...@gmail.com>: >> >> > unplug a linkUSB and plug it straight back in then it may change >> >> >> Agreed. But plugging and unplugging is usually not done on a "production" >> system. After reboot you should see the same configuration every time ? > > There's no guarentee, USB inherently dynamic bus. Using persistent device > names (/dev/serial/by-id/ etc.) is the only sane way.
I don't seem to have /dev/serial. This is on openWRT. Colin ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
