'dmesg' is the command that shows the system messages, including USB
plug/unplug.
'lsusb' (if installed) will give a list of current USB devices.


On Sun, Sep 28, 2014 at 11:39 AM, Colin Law <clan...@gmail.com> wrote:

> On 28 September 2014 15:00, Chris Green <c...@isbd.net> wrote:
> > I have a 1-wire installation which I am trying to diagnose remotely.
> >
> > A few days ago I had to replace the Beaglebone Black that was running
> > with another one becuase I corrupted the memory on the original one
> > and didn't have the ability to fix it there and then.
> >
> > So, I'm fairly sure I plugged in the 1-wire USB interface to the new
> > system and also connected the two temperature measuring devices to it.
>
> If you look in syslog (or the equivalent) you should see the usb
> interface being recognised.
>
> Colin
>
>
> ------------------------------------------------------------------------------
> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
>
> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
> _______________________________________________
> Owfs-developers mailing list
> Owfs-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to