I have a 'new' Hobby-Board 4 port master hub. It appears to be a working unit. I connected it via USB to a OpenSuSE box and using minicom, I can talk to the unit and it responds. However I am unable to get owfs to talk to it.
The HB master hub is on /dev/ttyACM0 and I have used this command line to try to get this running: owfs -d /dev/ttyACM0 --baud=9600 --6bit -m /mnt/1wire I think the above is the proper syntax to get owfs to talk to this master hub. Or is it? Since minicom talks to the board just fine, I am thinking it's an owfs command startup issue. When I issue the above, it just hangs and does not return to the command prompt until I hit Ctrl-C. Nothing gets registered in /mnt/1wire. But if I use a DS9490R (USB to 1wire adaptor) with one of HB's older hubs, it works fine. But then it takes a different command line syntax for that setup. Or is it an access issue accessing ttyACM0? Although minicom has no problem with it. Any pointers? Lyle ------------------------------------------------------------------------------ _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
