The config appears OK. My personal suggestion is to first debug owserver via the owshell programs (owdir and owread) and only then start to investigate owfs, owhttpd, owftpd.
Stefano > On 28 Aug 2015, at 10:47, David Johns <davejohn...@gmail.com> wrote: > > Tomasz, > > Thank you for the reply. > As you have said I was hoping to set it up so that everything talks to the > owserver but I am unsure how to go about this. > My machines ip address is 192.168.1.101 and everything pertaining to 1-wire, > such as scripts will be running on it. > My owfs.config is:- > > ! server: server = localhost:4304 > server: device = /dev/ttySNX0 > mountpoint = /mnt/1wire > allow_other > http: port = 2121 > ftp: port = 2120 > server: port = localhost:4304 > > As far as I can see, this should be configured correctly to do this. > > > David > > > On 8/28/2015 9:36 AM, Tomasz Torcz wrote: >> You are using recent Ubuntu, so you can enable owserver.socket and have >> owserver be started automatically when it's needed. And then you can >> configure owfs, owhttpd and other to connect to owserver and do not >> interact with 1wire bus directly. > > ------------------------------------------------------------------------------ > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers ------------------------------------------------------------------------------ _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
