Am 30.05.2016 um 17:27 schrieb Guy COLIN:
>
> this is an update. I have sorted, filtered all data got previously.
> in 61hours 108 triggerings. So as already said it means my 1wire device
> directories were ok 99.75% of the time and wrong 0.25%.
> When they are wrong the errors are the following
>
> 108 errors in /mnt/1wire
> 50% missing humidity sensor 26.FFD8F1000000 (DS2438)
> 50% LCD driver appears twice or even 3 times 29.1C9E09000000 (DS2408)
>
Double listing of devices means the "Search ROM" trickery fails. Most
likely because it's very fragile on any bit. No checksums at all.
You don't have a star topology cabling, do you?
Do you have homebrewn slaves in your bus?
If not, how do you power the sensor and the LED driver board? With a
local power supply, or using additional wires of the bus cable? How long
is the bus cable and which cross section the wires have?
> at same time 32 errors in /mnt/1wire/uncached or "owdir" output or
> "owdir uncached" output
>
Okay, so your problem isn't related to the owfs daemon. Please do
further tests with owdir and owread anyways.
> However it's worth to say that during all this time I had no missing measure.
>
Do you bypass the measurement when the directory listing says the device
isn't there? That would explain it.
Kind regards
Jan
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
