Lets 's start new.
I want a 1wire net outdoors. I want to avoid drilling hole into my brick walls.
So here the options:
1. squeeze cable beween window an wall
2. build wireless 1wire thingy e.g. RF or optical to connect through window
3. have a 1wire master like linkhube [1] sitting outdoors and connect throgh
wifi into my inhouse lan
[1] https://www.ibuttonlink.com/products/linkhube
1 is what I am doing and its bullshit. 2 is what I tried to e.g. using the new
I2C chip etc. blabla - I do not see how this could ever work. So 3 is now what
I am trying. Any other better ideas are welcome. I want to use wifi for one
1wire master outdoors but not for every single sensor. As FHEM can use an
Arduino as 1wire Master I came up with the Yun idea. Raspi Zero is fine too,
but someone needs to tell me how to set the software up, how to build the stuff
together. I don't want to run another instance of owfs on those devices as they
should act as master and not owfs servers.
Basically I could write a sketch for Arduino that emulates linkhube master and
then should be able to connect this to owserver but that would be quite some
effort given FHEM has already a solution for this...
The power btw. is no concern, if needed I can use a car battery... ;))
Greetings
DrTrigon
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
