Have you re-paid the first guy? Or did you send them back? Colin
On Sun, 4 Aug 2019 at 20:09, Mick Sulley <m...@sulley.info> wrote: > > It was all very simple. I was connecting the sensors via breadboard > type connectors. My old one worked, the new ones didn't. I just tried > connecting via the screw terminals on a Sheepwalk RPi2 and they all work > fine. I guess the pins on the new ones must be a bit corroded and that > stopped it making a good connection. > > Thanks for your help, sorry it was a bum steer. > > Mick > > On 04/08/2019 11:16, Jan Kandziora wrote: > > Am 04.08.19 um 10:02 schrieb Mick Sulley: > >> Yes it does. I also have a DS18S20 inside the test box that I use, that > >> shows as well. I have just tried a different DS2401 and get the same > >> results. > >> > > Please take a photo from the label side of the DS18B20, as well as the > > front and bottom side so we can check if it's obviously counterfeit. > > > > Kind regards > > > > Jan > > > > > > > > _______________________________________________ > > Owfs-developers mailing list > > Owfs-developers@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
