I’m no mastermind but self-service.dangote-group.com <http://self-service.dangote-group.com/> is different from 172.31.2.89.
Make sure that you have the correct hostname and domain under Configuration > System Configuration > General configuration If you are using web auth redirection change your URL as well either from the switch config in PF or the switch / controller itself. Thanks, Ludovic Zammit Product Support Engineer Principal Cell: +1.613.670.8432 Akamai Technologies - Inverse 145 Broadway Cambridge, MA 02142 Connect with Us: <https://community.akamai.com/> <http://blogs.akamai.com/> <https://twitter.com/akamai> <http://www.facebook.com/AkamaiTechnologies> <http://www.linkedin.com/company/akamai-technologies> <http://www.youtube.com/user/akamaitechnologies?feature=results_main> > On May 19, 2021, at 6:26 PM, Ezeh Victor <vickeyzed...@gmail.com> wrote: > > Hi Ludovic, > > Thank you. > > The Let's Encrypt option was successful as seen below and the haproxy-admin > service was restarted > > <image.png> > > > When users try tried to access the captive portal, it was stuck on this page. > > <image.png> > > All PF services were stopped and started again and users could no longer > access the page above that will enable them to access the captive portal. > > kindly assist as this will affect users by resumption. > > On Wed, 19 May 2021 at 20:35, Zammit, Ludovic <luza...@akamai.com > <mailto:luza...@akamai.com>> wrote: > The let’s encrypt integration with PF is pretty simple, it’s baed of the HTTP > challenge. > > If you want to use let’s encrypt service, your DNS name > self-service.dangote-group.con needs to resolve a public IP address that is > bind to the management interface over 443 and 80. > > Thanks, > > Ludovic Zammit > Product Support Engineer Principal > > Cell: +1.613.670.8432 > Akamai Technologies - Inverse > 145 Broadway > Cambridge, MA 02142 > Connect with Us: <https://community.akamai.com/> > <http://blogs.akamai.com/> > <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!G9vGOTkM6sqOIWJGYig9QvaqBKePkEkTKYSjwBMaDI-M06He7AhwSM7HPuJdbQ$> > > <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!G9vGOTkM6sqOIWJGYig9QvaqBKePkEkTKYSjwBMaDI-M06He7AhwSM5_CpBuXg$> > > <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!G9vGOTkM6sqOIWJGYig9QvaqBKePkEkTKYSjwBMaDI-M06He7AhwSM7Jgb9D1g$> > > <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!G9vGOTkM6sqOIWJGYig9QvaqBKePkEkTKYSjwBMaDI-M06He7AhwSM7Q7-BCow$> > >> On May 19, 2021, at 1:29 PM, Ezeh Victor <vickeyzed...@gmail.com >> <mailto:vickeyzed...@gmail.com>> wrote: >> >> HIi, >> >> My packetfence version is v10.2.0. >> >> I tried using the GUI to upload the required files. >> the private key generated when generating a .csr file was used in >> conjunction with the .crt file and this was the error message >> >> <image.png> >> >> Generating the .csr from the GUI does not generate a private key to be used >> in filling the data requirements. >> >> How can I tackle this? >> >> Also, trying out the let's encrypt option gives this error when testing >> public access >> >> <image.png> >> >> What is the procedure to use either? >> >> On Wed, 19 May 2021 at 13:00, Zammit, Ludovic <luza...@akamai.com >> <mailto:luza...@akamai.com>> wrote: >> Hello, >> >> Which PacketFence version are you using ? If it’s a version > v10 use the >> GUI for it, otherwise, the server.pem is a bundle of : server.key server.crt >> and intermediates if any. >> >> Thanks, >> >> Ludovic Zammit >> Product Support Engineer Principal >> >> Cell: +1.613.670.8432 >> Akamai Technologies - Inverse >> 145 Broadway >> Cambridge, MA 02142 >> Connect with Us: <https://community.akamai.com/> >> <http://blogs.akamai.com/> >> <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!EcqHJUqV-wetV_DNm6yHnvvryi_qAFOdRAAcDbLbwCFp561F3FVPuGjCi8Wzbg$> >> >> <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!EcqHJUqV-wetV_DNm6yHnvvryi_qAFOdRAAcDbLbwCFp561F3FVPuGi5eEi6EA$> >> >> <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!EcqHJUqV-wetV_DNm6yHnvvryi_qAFOdRAAcDbLbwCFp561F3FVPuGjd3VOgFg$> >> >> <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!EcqHJUqV-wetV_DNm6yHnvvryi_qAFOdRAAcDbLbwCFp561F3FVPuGg54xdavA$> >> >>> On May 19, 2021, at 4:23 AM, Ezeh Victor via PacketFence-users >>> <packetfence-users@lists.sourceforge.net >>> <mailto:packetfence-users@lists.sourceforge.net>> wrote: >>> >>> Hi, >>> >>> I have been having an issue using a third-party SSL certificate on PF for >>> the captive portal. >>> >>> Based on the documentation, the directive was to change the server.crt and >>> server.key files in the /usr/local/pf/conf/ssl/ folder. >>> >>> I generated the server.csr file using openssl req -new -newkey rsa:2048 >>> -nodes -keyout server.key -out server.csr. command >>> >>> I renamed the corresponding files to server.crt and server.pem and copied >>> them to the /usr/local/pf/conf/ssl/ folder and included the server.key file >>> generated during the server.csr generation. >>> >>> After doing this, I restarted the haproxy portal for the change to take >>> effect and it failed until I replace the server.pem file with the original >>> one. >>> >>> Please I need assistance with this. >>> >>> What am I missing? >>> _______________________________________________ >>> PacketFence-users mailing list >>> PacketFence-users@lists.sourceforge.net >>> <mailto:PacketFence-users@lists.sourceforge.net> >>> https://urldefense.com/v3/__https://lists.sourceforge.net/lists/listinfo/packetfence-users__;!!GjvTz_vk!C54N4JbJxSylz8oux_xKUlZBH1GUAKLr-30v-tBM_yic5PBVVZ9_bOER9HTRj4iI$ >>> >>> <https://urldefense.com/v3/__https://lists.sourceforge.net/lists/listinfo/packetfence-users__;!!GjvTz_vk!C54N4JbJxSylz8oux_xKUlZBH1GUAKLr-30v-tBM_yic5PBVVZ9_bOER9HTRj4iI$> >>> >> >
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
