I am a new user. I have Packetfence installed on CENTOS 5 and a complete cisco
shop. We are running in registration mode on Packetfence and on the Cisco side
we are using port-security.
I am just in the early stages of deployment right now. I have 2 production
switches with port-security completed and pointing to my Packetfence. My
switches.conf are setup in registration mode and appear correct.
When I run tcpdump and watch everything coming from the switch I can see snmp
request hitting the server.
I am expecting the server to auto register the PC's that get plugged in but it
doesn't. I can get it to register if I throw them in the registration VLAN and
go through the captive portal, I have been success with this in testing in my
lab, but in production I would like to do all the registration behind the
scenes so the user never knows. On the switch I have setup the port-security
mac-address line with the PC's mac address.
I can send some configs if it will help. Just let me know which ones will be
useful.
Thanks in advance.
Dan Nelson
------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
Packetfence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
