Here are my pf and networks conf files. I have the port on the switch that pf is plugged into set as an 802.1q trunk and in the network settings in CentOS you have to add eth0.2 and eth0.3 (where vlans 2 and 3 are the registration and isolation vlans). Let me know if you have any questions about that. I did struggle with all of that when I was getting it set up at first.
NATE RENBARGER NETWORK ADMINISTRATOR, UNIVERSITY INFORMATION TECHNOLOGY INDIANA WESLEYAN UNIVERSITY 4201 S. WASHINGTON ST. MARION, IN 46953 765.677.2340 | 765.677.2020 FAX [email protected] <mailto:[email protected]> INDWES.EDU/IT From: Marlon Bastida [mailto:[email protected]] Sent: Tuesday, February 22, 2011 9:26 PM To: PacketFence Lista Subject: [Packetfence-users] packet fence .conf problems Hi, Would like to know if have a basic pf.conf and networks.conf that I can modify to my network as simple as possible to enter in Web Interface and configure things there... ? I tried configurator.pl a lot of times, changed pf.conf and networks.conf to start packetfence and nothing happen (uncaught exception), always get a message and try to correct. Sometimes it gives me unknown configuration parameter network.mask or network.gateway (at this moment). Tks, Any help aprecciated
networks.conf
Description: networks.conf
pf.conf
Description: pf.conf
------------------------------------------------------------------------------ Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev
_______________________________________________ Packetfence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
