Nate,
I download this image: c2950-i6k2l2q4-mz.121-22.EA14.bin.
But I got SolarWinds TFTP and Cisco Kits TFTP servers, and on these 2
programas I can't get successfully doing a copy of startup-config, looking
on the console (serial). I can ping from the switch my computer but when I
did the copy I got timeout error.
Tks,
Marlon
2011/3/7 Renbarger, Nate <[email protected]>
> Glad you got access to the switch again, I know that it’s frustrating to
> get locked out. Yes, you’ll probably need the crypto version. The crypto
> version will have a k2 in the name like this:
> flash:c2950-i6k2l2q4-mz.121-22.EA13.bin.
> That will let you configure all of the encryption portions of the config.
> Also, to keep yourself from getting locked out again you can set it up with
> a local username and password. The command would be ‘username admin
> privilege 15 password mypassword’ where admin is your username and
> mypassword is the password. Then you can use that as the username and
> password at the prompt and it will authenticate locally.
>
>
>
> *NATE RENBARGER
> *NETWORK ADMINISTRATOR, UNIVERSITY INFORMATION TECHNOLOGY
>
> INDIANA WESLEYAN UNIVERSITY
> 4201 S. WASHINGTON ST.
> MARION, IN 46953
>
> 765.677.2340 | 765.677.2020 FAX
> [email protected]
>
>
> INDWES.EDU/IT
>
>
>
> *From:* Marlon Bastida [mailto:[email protected]]
> *Sent:* Friday, March 04, 2011 6:23 PM
>
> *To:* [email protected]
> *Subject:* Re: [Packetfence-users] Cisco 2950 Crypto Image
>
>
>
> Nate,
>
>
>
> Doing the show version command, bring me this:
>
>
>
>
>
> fence0>show ver | include System image
>
> System image file is "flash:/c2950-i6q4l2-mz.121-22.EA2.bin"
>
> fence0>
>
>
>
> Tks Marlon
>
>
>
> 2011/3/4 Renbarger, Nate <[email protected]>
>
> If you didn’t save the config then you can just reboot the switch and it
> will roll back the changed and you should have access again. If the config
> is saved and you got all of the switch config done you will have to either
> get the radius piece working in PF so you can authenticate against it or run
> through the password recovery procedure with the switch. Here is a link to
> the password recovery documentation.
> http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml
>
>
>
>
>
> *NATE RENBARGER
> *NETWORK ADMINISTRATOR, UNIVERSITY INFORMATION TECHNOLOGY
>
> INDIANA WESLEYAN UNIVERSITY
> 4201 S. WASHINGTON ST.
> MARION, IN 46953
>
> 765.677.2340 | 765.677.2020 FAX
> [email protected]
>
>
> INDWES.EDU/IT
>
>
>
> *From:* Marlon Bastida [mailto:[email protected]]
> *Sent:* Friday, March 04, 2011 4:41 PM
> *To:* [email protected]
> *Subject:* Re: [Packetfence-users] Cisco 2950 Crypto Image
>
>
>
> Nate,
>
>
>
> Well I did an update on PF, now I'm using PF 2.1.0.
>
>
>
> I'm using Cisco IOS 12.1(22)EA2, but I can't enter now with show version.
>
>
>
> I was trying to update my switch configs on my Cisco 2950 (WS-C2950-24)
> and I did until radius server config. (PF Admin guide 2.1.0)
>
> I put the RADIUS server on the same IP address (192.168.50.120) of PF VM
> (CentOS 5.5) and when I tried to enter on console need a username and
> password but can't enter on switch now...
>
>
>
> Tks
>
>
>
>
>
> 2011/3/4 Renbarger, Nate <[email protected]>
>
> Marlon,
>
>
>
> What’s the full version you are running? At the cli on the 2950 type “show
> ver | include System image” and post the results. If it is that it needs
> crypto (which trying to do the priv encryption it most likely does) you’ll
> have to get it from Cisco.com. To get that you’ll need a login because
> you’ll have to go through a waiver process to be able to download crypto
> software. You may also need to have a support contract or purchase the
> upgrade (I’m not sure on the edge switches if that’s the case for sure).
> Also that setup is incorrect, the documentation should be updated but the
> collowing commands:
>
> *snmp-server user readUser readGroup v3 auth md5 authpwdread priv des56*
>
> *privpwdread*
>
> *snmp-server user writeUser writeGroup v3 auth md5 authpwdwrite priv des56
> *
>
> *privpwdwrite*
>
>
>
> need to be:
>
> *snmp-server user readUser readGroup v3 auth md5 authpwdread priv aes 128*
>
> *privpwdread*
>
> *snmp-server user writeUser writeGroup v3 auth md5 authpwdwrite priv aes
> 128*
>
> *privpwdwrite*
>
>
>
> otherwise it won’t work.
>
>
>
> *NATE RENBARGER
> *NETWORK ADMINISTRATOR, UNIVERSITY INFORMATION TECHNOLOGY
>
> INDIANA WESLEYAN UNIVERSITY
> 4201 S. WASHINGTON ST.
> MARION, IN 46953
>
> 765.677.2340 | 765.677.2020 FAX
> [email protected]
>
>
> INDWES.EDU/IT
>
>
>
> *From:* Marlon Bastida [mailto:[email protected]]
> *Sent:* Friday, March 04, 2011 12:48 PM
> *To:* PacketFence Lista
> *Subject:* [Packetfence-users] Cisco 2950 Crypto Image
>
>
>
> Hi,
>
>
>
> I'm doing the steps about SNMP config. on a Cisco 2950 - (WS-C2950-24). So
> I did basic reseach on the software guide and tell me about download a
> Software Image for enable priv (needs to use a crypto image).
>
> Can u point me a download link to the a right image software of this swtich
> model, please?
>
>
>
> priv commands need a software image to work...
>
>
>
>
>
> *snmp-server engineID local AA5ED139B81D4A328D18ACD1*
>
> *snmp-server group readGroup v3 priv*
>
> *snmp-server group writeGroup v3 priv read v1default write v1default*
>
> *snmp-server user readUser readGroup v3 auth md5 authpwdread priv des56*
>
> *privpwdread*
>
> *snmp-server user writeUser writeGroup v3 auth md5 authpwdwrite priv des56
> *
>
> *privpwdwrite*
>
> *snmp-server enable traps port-security*
>
> *snmp-server enable traps port-security trap-rate 1*
>
>
>
>
>
> Tks,
>
> Marlon
>
>
>
> ------------------------------------------------------------------------------
> What You Don't Know About Data Connectivity CAN Hurt You
> This paper provides an overview of data connectivity, details
> its effect on application quality, and explores various alternative
> solutions. http://p.sf.net/sfu/progress-d2d
> _______________________________________________
> Packetfence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
>
>
>
> ------------------------------------------------------------------------------
> What You Don't Know About Data Connectivity CAN Hurt You
> This paper provides an overview of data connectivity, details
> its effect on application quality, and explores various alternative
> solutions. http://p.sf.net/sfu/progress-d2d
> _______________________________________________
> Packetfence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
>
>
> ------------------------------------------------------------------------------
> What You Don't Know About Data Connectivity CAN Hurt You
> This paper provides an overview of data connectivity, details
> its effect on application quality, and explores various alternative
> solutions. http://p.sf.net/sfu/progress-d2d
> _______________________________________________
> Packetfence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
------------------------------------------------------------------------------
What You Don't Know About Data Connectivity CAN Hurt You
This paper provides an overview of data connectivity, details
its effect on application quality, and explores various alternative
solutions. http://p.sf.net/sfu/progress-d2d
_______________________________________________
Packetfence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
