Nate,
I was testing here, PF 2.1.0 commands (admin guide), and I tried putting
priv command, now works with IOS EA14, but I got this message.
Now I got a invalid command, look bellow:
fence0(config)#$roup v3 auth md5 authpwdread priv aes 128 privpwdread
snmp-server user readUser readGroup v3 auth md5 authpwdread priv aes 128
privpwd
^read
% Invalid input detected at '^' marker.
Tks Marlon
fence0(config)#$roup v3 auth md5 authpwdread priv aes 128 privpwdread
snmp-server user readUser readGroup v3 auth md5 authpwdread p^read
% Invalid input detected at '^' marker.
fence0(config)#
2011/3/4 Renbarger, Nate <[email protected]>
> Marlon,
>
>
>
> What’s the full version you are running? At the cli on the 2950 type “show
> ver | include System image” and post the results. If it is that it needs
> crypto (which trying to do the priv encryption it most likely does) you’ll
> have to get it from Cisco.com. To get that you’ll need a login because
> you’ll have to go through a waiver process to be able to download crypto
> software. You may also need to have a support contract or purchase the
> upgrade (I’m not sure on the edge switches if that’s the case for sure).
> Also that setup is incorrect, the documentation should be updated but the
> collowing commands:
>
> *snmp-server user readUser readGroup v3 auth md5 authpwdread priv des56*
>
> *privpwdread*
>
> *snmp-server user writeUser writeGroup v3 auth md5 authpwdwrite priv des56
> *
>
> *privpwdwrite*
>
>
>
> need to be:
>
> *snmp-server user readUser readGroup v3 auth md5 authpwdread priv aes 128*
>
> *privpwdread*
>
> *snmp-server user writeUser writeGroup v3 auth md5 authpwdwrite priv aes
> 128*
>
> *privpwdwrite*
>
>
>
> otherwise it won’t work.
>
>
>
> *NATE RENBARGER
> *NETWORK ADMINISTRATOR, UNIVERSITY INFORMATION TECHNOLOGY
>
> INDIANA WESLEYAN UNIVERSITY
> 4201 S. WASHINGTON ST.
> MARION, IN 46953
>
> 765.677.2340 | 765.677.2020 FAX
> [email protected]
>
>
> INDWES.EDU/IT
>
>
>
> *From:* Marlon Bastida [mailto:[email protected]]
> *Sent:* Friday, March 04, 2011 12:48 PM
> *To:* PacketFence Lista
> *Subject:* [Packetfence-users] Cisco 2950 Crypto Image
>
>
>
> Hi,
>
>
>
> I'm doing the steps about SNMP config. on a Cisco 2950 - (WS-C2950-24). So
> I did basic reseach on the software guide and tell me about download a
> Software Image for enable priv (needs to use a crypto image).
>
> Can u point me a download link to the a right image software of this swtich
> model, please?
>
>
>
> priv commands need a software image to work...
>
>
>
>
>
> *snmp-server engineID local AA5ED139B81D4A328D18ACD1*
>
> *snmp-server group readGroup v3 priv*
>
> *snmp-server group writeGroup v3 priv read v1default write v1default*
>
> *snmp-server user readUser readGroup v3 auth md5 authpwdread priv des56*
>
> *privpwdread*
>
> *snmp-server user writeUser writeGroup v3 auth md5 authpwdwrite priv des56
> *
>
> *privpwdwrite*
>
> *snmp-server enable traps port-security*
>
> *snmp-server enable traps port-security trap-rate 1*
>
>
>
>
>
> Tks,
>
> Marlon
>
>
> ------------------------------------------------------------------------------
> What You Don't Know About Data Connectivity CAN Hurt You
> This paper provides an overview of data connectivity, details
> its effect on application quality, and explores various alternative
> solutions. http://p.sf.net/sfu/progress-d2d
> _______________________________________________
> Packetfence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
------------------------------------------------------------------------------
Colocation vs. Managed Hosting
A question and answer guide to determining the best fit
for your organization - today and in the future.
http://p.sf.net/sfu/internap-sfd2d
_______________________________________________
Packetfence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
