To echo below and provide a bit more detail...
Make sure on the WLC under Radius Authentication Servers - Your packetfence
server has "Support for RFC 3576" Enabled.
That will allow the radius server to send a disconnect to the wlc to drop the
client, in which when they reconnect they will be on the correct vlan. If not
the client doesn't get that the vlan has changed for them...
Also on the wireless lan in the WLC make sure under the AAA section that you
allow AAA override, which allows the different vlans be set by radius server.
David Bulanda
Network Services Manager
[email protected]<mailto:[email protected]>
Indiana Tech<http://www.indianatech.edu/>
> Configure the normal VLAN on your WLC (in PacketFence) to a VLAN that is
allowed to go to the Internet from your WLC controller.
Administration guide should walk through this setup. Just do it with
your WLC instead of a switch.
Hope this helps.
--
Olivier Bilodeau
[email protected]<mailto:[email protected]> :: +1.514.447.4918 *115 ::
www.inverse.ca<http://www.inverse.ca>
Inverse inc. :: Leaders behind SOGo (www.sogo.nu<http://www.sogo.nu>) and
PacketFence
(www.packetfence.org<http://www.packetfence.org>)
From: Giuseppe Galati [mailto:[email protected]]
Sent: Tuesday, September 04, 2012 10:11 AM
To: [email protected]
Subject: [PacketFence-users] R: Simple Captive Portal for Wifi Access
Hi guys I would like give you an update.
I'm trying to configure an integration with Cisco WLC for a captive portal. I'm
using VLAN enforcement deploy.
At the moment I reach correctly the registration page and login with default
user demouser.
Now the problem is how can I allow the user to go internet?
Shall I need another SSID for that authentication or can I use the same SSID?
(I prefere the second way...)
Thanks in advance
Da: Giuseppe Galati
[mailto:[email protected]]<mailto:[mailto:[email protected]]>
Inviato: martedì 4 settembre 2012 08:43
A:
[email protected]<mailto:[email protected]>
Oggetto: [PacketFence-users] Simple Captive Portal for Wifi Access
Hi guys,
I'm trying to deploy a captive portal for wifi guests that are allowed to
make self registration. I would like use only one SSID and use vlan enforcement
deployment (the inline mode could be a single point of failure).
Can I do that without enabling 802.1x? How can user access to Internet once it
make his/her account?
Thanks in advance
Joseph
________________________________
Nessun virus nel messaggio.
Controllato da AVG - www.avg.com<http://www.avg.com>
Versione: 2012.0.2197 / Database dei virus: 2437/5247 - Data di rilascio:
03/09/2012
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
