Thanks Mark,
I have read that document and am mostly ok there. I am just having a problem
getting the project going past initial installation. Maybe you can give me a
little guidance?
I read earlier that I should only have 2 NICs, so
1. NIC 1 is Management only?
2. NIC 2 has VLAN 10 IP 192.168.1.1 for Registration
VLAN 20 IP 192.168.2.1 for Isolation
VLAN 30 IP 192.168.3.1 for Other ???????? Other like
what? BYOD?
Can I have other "Other"s for company assets? Maybe
VLAN 40, 50, and 60?
Is NIC2 plugged into the switch or is it only used for internal web
pages?
On the switch, if NIC 1 is plugged into port 1, it would be untagged. If NIC 2
is plugged into port 2, is it tagged?
>From the trapping Tab, should the Trapping range be the range of the BYOD
>network and any other Network I want going through the PF?
>From the Registration Tab, should the Registration Range be the registration
>subnet(192.168.2.0/24)
I do have the manual printed and open, the PDF of same open on my screen, and
searching the Internet so I am referencing everything, I am just not finding
everything I need. Or at least I am not understanding it.
Anything you can add to help get me off the ground is greatly appreciated.
Steve
-----Original Message-----
From: Mark Holmes [mailto:[email protected]]
Sent: Wednesday, May 29, 2013 2:24 PM
To: [email protected]
Subject: Re: [PacketFence-users] Save buttons do nothing
Hi Steve,
Which model of HP switch are you using?
Have a look at
http://www.packetfence.org/downloads/PacketFence/doc/PacketFence_Network_Devices_Configuration_Guide-4.0.1.pdf
That document will tell you which methods your switch will support and how to
configure it to communicate with PF.
Mark
On 29 May 2013, at 20:46, "Steve Bradley" wrote:
> Great call! I am using IE8. I switched to Firefox and it worked correctly.
> Thanks for the tip!!
>
> Do you have any advice for moving forward? I am doing a lot of guessing at
> the moment. I have HP switches trying to contain BYOD.
>
> Thanks!!!!!!!
>
>
> -----Original Message-----
> From: Francis Lachapelle [mailto:[email protected]]
> Sent: Wednesday, May 29, 2013 12:33 PM
> To: [email protected]
> Subject: Re: [PacketFence-users] Save buttons do nothing
>
> Hi Steve
>
> On 2013-05-29, at 11:51 AM, Steve Bradley wrote:
>
>> I am new to PF. The documentation does a pretty good job for the
>> installation but really fails past that. I really am just hacking around
>> since I am not totally sure what to do next. I try to create a Role, Rule,
>> Switch and probably other things and when I click on SAVE, it does nothing.
>> Creating a ROLE seamed really easy and harmless. Click on the tab, Add
>> Role, give it a name, description and Nodes Per User, then click on SAVE.
>> It doesn't do anything. I did add a switch through the command line, but
>> I'd like to not use that method if I don't have to only because I am going
>> to have to show others how to use this. I have reloaded the server (CENTOS
>> 6.4) easily a dozen times so I am thinking I have to be doing some very
>> wrong.
>
> What browser do you use? Any JavaScript error?
>
> Is the form submitted? Any error in the logs?
>
> Thanks,
>
> Francis
>
> --
> [email protected] :: +1.514.755.3640 :: http://www.inverse.ca
> Inverse :: Leaders behind SOGo (http://sogo.nu) and PacketFence
> (http://packetfence.org)
>
>
> ------------------------------------------------------------------------------
> Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
> Get 100% visibility into your production application - at no cost.
> Code-level diagnostics for performance bottlenecks with <2% overhead
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap1
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
> ------------------------------------------------------------------------------
> Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
> Get 100% visibility into your production application - at no cost.
> Code-level diagnostics for performance bottlenecks with <2% overhead
> Download for free and get started troubleshooting in minutes.
> http://p.sf.net/sfu/appdyn_d2d_ap1
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
Nuffield College is a Registered Charity No. 1137506. Registered Office:
Nuffield College, New Road, Oxford, OX1 1NF
------------------------------------------------------------------------------
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance bottlenecks with <2% overhead
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance bottlenecks with <2% overhead
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
